氟塑料絕緣硅橡膠護套高溫電力電纜

Fluroplastic insulation silicon rubber sheath high-temperature power cable

執行標準

utive standard

Q/HYDL13-2012

適用范圍

Applications

本產品具有耐高溫、耐低溫、柔軟、耐腐蝕等特點，適用于發電、冶金、化工、石油等工礦企業，在0.6/KV及以下惡劣環境中連接工業移動式電氣設備傳輸電力線路用。

The products have the features of resisting high and low temperature，anti-corrosion and softness.They are used as power transmission and distribution lines of 0.6/1KV under bad environment in the electric generation,petrol-chemical and oil industries.

使用特性

Working features

1、額定電壓：Uo/U為0.6/1KV。

2、電纜導體的長期允許工作溫度不超過200℃

3、電纜的敷設溫度不低于：

固定敷設-60℃

非固定敷設-20℃

4、推薦的允許彎曲半徑：

無鎧裝層的電纜，應不小于電纜外徑的6倍。

電力電纜應不小于電纜外徑的10倍。

有鎧裝結構的電纜，應不小于電纜外徑的 12倍。

1、Rated voltage Uo/U:0.6/1KV.

2、The allowable working temperature during long period 200℃.

3、The ambient temperature should not be lower than:

-60℃ for fixed cable laying.

-20℃ for temporary cable laying.

4、Recommended allowable bending radius:

Should be not be smaller than 6×cable diameter for cables without steel armoring layer.

Should be not be smaller than 10×cable diameter for power cables.

Should be not be smaller than 12×cable diameter for cables with steel armoring layer.

電纜型號、名稱

Model and name

型號

Model

名稱

Name

主要使用范圍

Application

YGC-F₄₆

銅芯氟塑料絕緣硅橡膠護套高溫電力電纜

Cu Fluroplastic insulation silicon rubber sheath high-temperature power cable

敷設在室內、電纜溝、管道固定場合

Laid-up indoors,cbale channels,ａnd in the pipes

YGC-F₄₆-22

銅芯氟塑料絕緣硅橡膠護套鋼帶鎧裝高溫電力電纜

Cu Fluroplastic insulation silicon rubber sheath steel-tape armoring high-temperature power cable

敷設在室內、電纜溝、管道、直埋等能承受較大機械外力等固定場合

Laid-up indoors,cbale channels,and buried underground,withstanding big mechanical outside force

YGC-F₄₆R

氟塑料絕緣低煙低鹵阻燃聚氯乙烯護套高溫電力電纜

Fluroplastic insulation low-smoke and low-halogen flame-retardant PVC sheath high-temperature power cable

敷設在室內移動要求柔軟等場合

Laid-up indoors and mobile

規格、結構

Struture

芯數×標稱截面Core no.×section (mm²)	導體種類Conductor type	F₄₆絕緣標稱厚度 Insulation thicdness(mm)	保護層厚度 Protection thicdness(mm)	電纜近似外徑 Cable outer dia.（mm）
芯數×標稱截面Core no.×section (mm²)	導體種類Conductor type	F₄₆絕緣標稱厚度 Insulation thicdness(mm)	保護層厚度 Protection thicdness(mm)	YGC-F46	YGC-F₄₆R	YGC-F₄₆-22
3×4	B	0.5	-	11.4	-	15.2
3×6	B	0.6	-	13.5	-	16.7
3×10	B	0.8	1.0	20.4	16.1	23.4
3×16	B	1.0	1.0	24.4	-	27.4
3×16	R	1.2	-	-	19.2	-
3×25	B	1.2	1.2	29.2	-	32.2
3×25	R	1.2	-	-	23	-
3×35	B	1.2	1.2	32.7	-	35.7
3×35	R	1.2	-	-	26.5	-
3×50	B	1.2	1.2	36.5	-	39.5
3×50	R	1.2	-	-	29.3	-
3×70	B	1.2	1.2	40.4	-	44.8
3×70	R	1.2	1.2	-	43.5	-
3×95	B	1.2	1.2	45.5	-	49.9
3×120	R	1.2	1.2	-	47.2	-
3×120	B	1.2	1.4	52.8	-	57.2
3×150	R	1.2	1.4	-	53.7	-
3×150	B	1.2	1.6	59.0	-	63.4
3×185	R	1.2	1.6	-	64.5	-
3×185	B	1.2	1.6	65.0	-	69.4
3×240	R	1.2	1.8	-	67	-
3×240	B	1.2	2.0	74.3	-	82.6
3×4+1×2.5	R	0.5	2.0	-	78.2	-
3×4+1×2.5	B	0.5	-	11.3	-	14.3
3×6+1×4	R	0.6	-	-	12.4	-
3×6+1×4	B	0.6	-	12.7	-	15.7
3×10+1×6	R	0.8	-	-	13.9	-
3×10+1×6	B	0.8	1.0	21.5	-	24.5
3×16+1×10	R	1.0	-	-	24.8	-
3×16+1×10	B	1.2	1.0	25.8	-	28.8
3×25+1×16	R	1.2	-	-	30	-
3×25+1×16	B	1.2	1.2	31.8	-	34.8
3×35+1×16	R	1.2	-	-	36.2	-
3×35+1×16	B	1.2	1.2	34.4	-	37.4
3×50+1×25	R	1.2	-	-	40.8	-
3×50+1×25	B	1.2	1.2	38.5	-	42.9
3×70+1×35	R	1.2	-	-	44.5	-
3×70+1×35	B	1.2	1.2	43.7	-	48.1
3×95+1×50	R	1.2	1.2	-	51.7	-
3×95+1×50	B	1.2	1.2	49.0	-	53.2
3×120+1×70	R	1.2	1.2	-	57.1	-
3×120+1×70	B	1.2	1.4	55.7	-	60.1
3×150+1×70	R	1.2	1.4	-	64.7	-
3×150+1×70	B	1.2	1.6	60.3	-	64.0
3×185+1×95	R	1.2	1.6	-	75.0	-
3×185+1×95	B	1.2	1.8	65.4	-	69.1
3×240+1×120	R	1.2	1.8	-	77.9	-

注：1、對于B類絕緣線芯截面在10 mm²以上和R類絕緣線芯截面在50 mm²以上的軟電纜絕緣層允許采用阻燃保護層形式，以加強電纜的機械性能。

Note:1.For insulation class B cable more than 10 mm² and Class R cable more than 50 mm²,the flame-retardant protection layer should be applied to strength the mechanical property.

2、為了考慮電纜機械性能和安裝方便，對于大規格電纜可采用另加阻燃護套方式進行防護。

For big cables,the additional flame-retardant sheath is applied for easy installation.

3、根據用戶需要，可以生產2芯、4芯、5芯電纜。

2-core,4-core and 5-core cables are producible as producible as per repuest.

主要技術指標 Main technical index

標稱截面 Section area (mm²)	導體結構 Conductor structure		20℃時導體電阻(Ω/km)不大于 Conductor resistance at 20℃ not more than		交流電壓試驗 AC voltage test
標稱截面 Section area (mm²)	種類 Type	根數/單絲直徑 No./single wire dia(mm)	不鍍錫 Non tin-plated	鍍錫 Tin-plated	交流電壓試驗 AC voltage test
4	A	1/2.25	4.61	4.7	3.5 KV 5min不擊穿 3.5 KV 5min No breakthrough
4	B、R	7/0.85，19/0.52	4.61	4.7
6	A	1/2.76	3.08	3.11
6	B、R	7/1.04，19/0.64	3.08	3.11
10	B、R	7/1.35，49/0.52	1.83	1.84
16	B、R	7/1.7，84/0.49	1.21	1.24
25	B、R	7/2.14，98/0.58	0.727	0.734
35	B、R	7/2.52，133/0.58	0.524	0.529
50	B、R	19/1.78，133/0.68	0.387	0.393
70	B、R	19/2.14，133/0.68	0.27	0.277
95	B、R	19/2.52，259/0.68	0.197	0.210
120	B、R	24/2.52，608/0.50	0.161	0.164
150	B、R	37/2.52，756/0.50	0.129	0.132
185	B、R	37/2.52，427/0.74	0.0991	0.100
240	B、R	61/2.52，427/0.85	0.0754	0.0762

產品結構圖 Structure

型號說明 Model explanation

項目

Item

代號

Code

說明

Explanation

系列代號

Series no.

移動式電器設備等用電纜

Mobile equipment cable

結構代號

Conductor code

重型

Hesvy duty

導體代號

Conductor code

銅導體（省略）Cu(omitted)

鍍錫導體Tin-plated conductor

絕緣材料代號

Insulation material code

聚全氟乙丙烯

（F46）

護套材料代號

Sheath material code

硅橡膠

Silicon rubber

導體種類

Conductor type

單股導體X（可省略）Single core(omittde)

七股絞合導體7-core strands conductor

多股軟導體Multi-core strands conducto

交貨長度

Length for delivery

無鎧裝電纜允許長度不小于500米，鎧裝電纜允許長度不小于200米。允許長度不小于30米短段電纜交貨，其數量應不超過交貨總長度的10%。

其它交貨長度應根據雙方協議長度交貨。

For cable without armoring,the delivery length is not less than 500m,ａnd for cable with armoring,the delivery length is not less than 200m.30m length is available,but the total amount should not more than 10% of the delivery length.

Other length is as per agreement.