氟塑料絕緣高溫電力電纜

Fluroplastic insulation high temperature power cable

執行標準

utive standard

Q/HYDL14-2012

適用范圍

Applications

本產品適用于固定敷設在額定電壓0.6/1KV及以高溫環境下的輸配電線路中。

阻燃電纜主要用于有防火要求較高的場合。該產品保持同電壓等級、同規格普通電纜所有的性能指標，如：較高的機械、物理性能，優良的電氣性能和耐化學腐蝕性能等，又具有阻燃特性避免了由于電纜引起的火災的蔓延，減少了生命和財產的巨大損失。

低煙低鹵阻燃電纜除保持阻燃電纜的一般特性和電氣性能外，還具有燃燒時發煙量小、氣體釋放量小和低腐蝕性的特點。

低煙無鹵阻燃產品除了能滿足阻燃電費的使用要求外，還具有無鹵酸氣體釋出、發煙量小、產品腐蝕性氣體較少、阻燃性能好的特點。

The products are used as the transmission and distribution lines of under 0.6/1KV(rated voltage Uo/U)in the environment of high temperature.

Flame retardant cables are mainly used in the places where there is strict fire-proof regulations .In addition to the features of the common cables of the same voltage class and specifications,such as mechanical and mechanical properties and anti-corrosion,they also can resist burning slow down the spread of the fire and reduce the damage.

Low-fume and low-halogen flame retardant cables have the features of low corrosive smoke and little HCL gas during the burning.

Low-fume and non-halogen flame retardant cables have the features of no acid gas emission,low fume,little corrosive smoke and excellent fire resistance.

使用特性

Working features

1、額定電壓：Uo/U為0.6/1KV。

2、電纜導體長期允許工作溫度

FF型不超過200℃；

ZR-FV、ZR-FV₂₂型不超過105℃；

WD-FV、WD-FV₂₂型不超過90℃

3、敷設時的環境溫度不低于0℃，低于0℃應預先加熱。

4、電纜允許彎曲半徑應不小于電纜外徑的15倍。

1、Rated voltage Uo/U:0.6/1KV.

2、The allowable long-time working temperature:

Should not higher than 200℃ for Model FF.

Should not higher than 105℃ for Model ZR-FV and ZR-FV₂₂

Should not higher than 90℃ for Model WD-FV、WD-FV₂₂.

3、The temperature of the cables must bu over 0℃ in construction work.In not,the cables must be pre-heated.

4、The allowable bending radius of the cables must not be less than 15 times of the multi-core cable outer diameter.

型號、名稱

Model and name

型號

Model

名稱

Name

氟塑料絕緣和護套高溫電力電纜

Fluroplastic insulation and sheath high-temperature power cable

ZR-FV

氟塑料絕緣阻燃聚氯乙烯護套高溫電力電纜

Fluroplastic insulation flame-retardant PVC sheath high-temperature power cable

WD-FV

氟塑料絕緣低煙無鹵阻燃聚氯乙烯護套高溫電力電纜

Fluroplastic insulation low-smoke and halogen-free flame-retardant PVC sheath high-temperature power cable

ZR-FV₂₂

氟塑料絕緣阻燃聚氯乙烯護套鋼帶鎧裝高溫電力電纜

Fluroplastic insulation flame-retardant PVC sheath steel-tage armoring high-temperature power cable

WD-FV₂₂

氟塑料絕緣低煙無鹵阻燃聚氯乙烯護套鋼帶鎧裝高溫電力電纜

Fluroplastic insulation low-smoke and halogen-free flame-retardant PVC sheath steel-tage armoring high-temperature power cable

規格范圍 Specifications Range

型號 Model	芯數 Core no.	標稱截面 Section area(mm²)
FF	1～４，3+1	1.5～240
ZR-FV，WD-FV	1～４，3+1	1.5～185
ZR-FV₂₂，WD-FV₂₂	2～４，3+1	4～185

3+1芯 3+1-core

主線芯 Main cores	中性線芯 Neutral core	主線芯 Main cores	中性線芯 Neutral core	主線芯 Main cores	中性線芯 Neutral core
4	2.5	25	16	95	50
6	4	35	16	120	70
10	6	50	25	125	70
16	10	70	35	185	95

注：1、對于B類絕緣線芯截面在10 mm²以上和R類絕緣線芯截面在50 mm²以上的軟電纜絕緣層允許采用阻燃保護層形式，以加強電纜的機械性能。

2、為了考慮電纜機械性能和安裝方便，對于大規格電纜可采用另加阻燃護套方式進行防保。

3、根據用戶需要，可以產生5芯電力電纜。

Note:1.For insulation Class B cable more than mm²ａnd Class R cable more than 50 mm²,it is allowable to have the flame-retardant layer,to reinforce the mechanical property of the cable.

2.In consideration of the mechanical property and installation,it is recommended to add flame-retardant sheath for protection.

3.5-core power cables are producible as per requirements.

主要技術指標 Main technical index

標稱截面 Section area (mm²)	導體結構 Conductor structure		20℃時導體電阻(Ω/km)不大于 Conductor resistance at 20℃ not more than		交流電壓試驗 AC voltage test
標稱截面 Section area (mm²)	種類 Type	根數/單絲直徑 No./single wire dia(mm)	不鍍錫 Non tin-plated	鍍錫 Tin-plated	交流電壓試驗 AC voltage test
4	A	1/2.25	4.61	4.7	3.5 KV 5min不擊穿 3.5 KV 5min No breakthrough
4	B、R	7/0.85，19/0.52	4.61	4.7
6	A	1/2.76	3.08	3.11
6	B、R	7/1.04，19/0.64	3.08	3.11
10	B、R	7/1.35，49/0.52	1.83	1.84
16	B、R	7/1.7，84/0.49	1.21	1.24
25	B、R	7/2.14，98/0.58	0.727	0.734
35	B、R	7/2.52，133/0.58	0.524	0.529
50	B、R	19/1.78，133/0.68	0.387	0.393
70	B、R	19/2.14，133/0.68	0.27	0.277
95	B、R	19/2.52，259/0.68	0.197	0.21
120	B、R	24/2.52，608/0.50	0.161	0.174
150	B、R	37/2.52，756/0.50	0.129	0.132
185	B、R	37/2.52，427/0.74	0.0991	0.1
240	B、R	61/2.52，427/0.85	0.0754	0.0762

產品結構圖 Structure

型號說明 Model explanation

項目

Item

代號

Code

說明

Explanation

阻燃代號

Flame-retardant code

阻燃型Flame-retardant

低煙型Low-smoke

無鹵型lalogen-free

導體代號

Conductor code

銅導體（省略）Cu(omitted)

鍍錫導體Tin-plated conductor

絕緣材料代號

Insulation material code

聚全氟乙丙烯（F46）

護套材料代號

Sheath material code

聚氯乙烯PVC

鎧裝代號

Armoring code

鋼帶Steel-tape

細鋼絲Fine steel-wire

導體種類

Conductor type

單股導體X（可省略）Single core(omittde)

七股絞合導體7-core strands conductor

多股軟導體Multi-core strands conducto

交貨長度

Length for delivery

無鎧裝電纜允許長度不小于500米，鎧裝電纜允許長度不小于200米。允許長度不小于30米短段電纜交貨，其數量應不超過交貨總長度的10%。

其它交貨長度應根據雙方協議長度交貨。

For cable without armoring,the delivery length is not less than 500m,ａnd for cable with armoring,the delivery length is not less than 200m.30m length is available,but the total amount should not more than 10% of the delivery length.

Other length is as per agreement.