照度計中國臺灣路昌LX-02 照度轉換器

LX-02 照度轉換器

中國臺灣路昌照度計選購件，照度計轉換器

特色

測量范圍:

         0 ~ 2000 Lux (0.1mV=1Lux)

         2000 ~ 20000 Lux (0.1mV=10Lux)

         20000 ~ 50000 Lux (0.1mV=100Lux)

精確度 : ±5%

Size : 100 x 50 x 25mm

應用

To cooperate with DMM be used as a precision Light ( LUX meter ) or to connect with analyzer, recorder, tape recorder, controller... .

規格：

范圍 (Range)

3 ranges : Range 1, Range 2, Range 3

Range 1 - 0 to 2,000 Lux.

Range 2 - 2,000 to 20,000 Lux.

Range 3 - 20,000 to 50,000 Lux.

輸出 (Output)

Range 1 - 0.1 mV per Lux.

Range 2 - 0.1 mV per 10 Lux.

Range 3 - 0.1 mV per 100 Lux.

精確度 (Accuracy)

± ( 5% + 0.2 mV ).

感應器 (Sensor)

Exclusive photo diode & correction filter, spectrum meet C.I.E.

Sensor COS correction factor meet standard.

電源供應 (Power Supply)

DC 9V battery, 006P, MN1604(PP3) or equivalent.

電源損耗 (Power Consumption)

Approx. DC 6 mA.

低電壓 (Power Failure)

Build in low battery indicator.

操作溫度 (Operating Temp.)

0 to 50℃ (32 to 122℉).

操作濕度 (Operating Humidity)

Less than 80% RH.

體積 (Dimension)

MMain instrument : 100 x 50 x 25 mm ( 3.9 x 1.9 x 1.0 inch ).

Sensor probe: 82 x 55 x 7 mm ( 3.2 x 2.2 x 0.3 inch ).

重量 (Weight)

150 g/0.33 LB (including battery).

照度計中國臺灣路昌LX-02 照度轉換器

附件 (Standard Accessories)

Light Sensor....................................... 1 PC.

Instruction Manual ................................ 1 PC.

操作程序 (OPERATION PROCEDURES)

* Connect the output plugs to the volts ( Hi ) & com ( Lo ) input terminals of external Voltmeter or Multimeter.

* Multimeter : Select the desired range of DC volt 200 mV range.

Note :

a. Do not use auto range MULTIMETER.

b. The input impedance of external MULTIMETER (voltmeter) should be 10 Meg ohm at least.