主要特點Main features
Heat insulating materials adopt Alumina fiber inorganic ones, which is formed with vacuum absorption, environmental protecting and energy saving.
保溫材料采用真空吸附成型的氧化鋁纖維無機材料，環保節能;
Furnace body is double air cooling structure to control furnace surface Temp. no more than 60℃ when furnace is heated into max. Temp.
爐體采用雙層風冷結構，爐子燒到溫度時，殼體表面溫度低于60℃
Made of various heat insulating materials to make furnace smaller and energy consumption less(electric consumption is only 25% of the same type furnace consumption)
采用多種保溫材料組合制成，使爐子體積小，能量消耗少(耗電量是同類產品耗電量的四分之一)
技術參數Technical Parameters
| Power 輸入電源 | Power rated: 5.2KW (220V) 額定功率：5.2KW (220V) |
| Voltage 電壓 | Voltage rated: AC 220V 50/60HZ 額定電壓：AC 220V 50/60HZ |
| Working Temperature 工作溫度 | Max. Temperature: 1400℃ ( 1 hr) 溫度：1400℃ (1小時) Continuous working temperature: ≤1300℃ 持續工作溫度：≤1300℃ Recommended Heating Rate: 10℃/min 推薦升溫速率：10℃/分 |
| Temperature Controller 控溫方式 | PID automatic control and auto-tune function. 模糊PID控制和自整定調節 30 programmable segments for precise thermal processing. 智能化30段可編程控制 Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 |
| Thermocouple 熱電偶 | S type S型 |
| Heating Elements 加熱元件 | Silicon Carbide Rod 硅碳棒 |
| Temperature Accuracy 控溫精度 | +/- 1℃ |
| Dimensions 尺寸 | · Chamber size(L*D*H): 200*300*200mm (12L) 腔體尺寸(長*深*高)：200*300*200mm (12L) · Furnace size(L*W*H): 550*660*820mm 爐子尺寸(長*寬*高)：550*660*820mm |
| Net Weight 凈重 | 120kg |
| Shipping dimensions(L*W*H) 包裝尺寸(長*寬*高) | 760*700*1140mm（wooden case） 760*700*1140mm（木箱） |
| Shipping weight 毛重 | 150kg |
| Warranty 質保 | One year limited warranty with lifetime support (Such consumable parts as thermal insulation material, and O-rings are NOT supported by the warranty) 一年質保終身支持（消耗品如保溫材料，O型圈不在質保范圍內） |
| Warning 注意事項 | Toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision. Please put furnace into fume hood for better safety 沒有安全控制和監督的情況下，不建議使用有毒或爆炸性氣體。為了安全，請把爐子放在通風處。 Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 You shall place the sample in to a crucible. Never place sample on the chamber bottom directly. 建議將樣品放進坩堝里。不要把樣品直接放在腔底。 |
| Compliance 認證 | CE Certified CE認證 All electric components ( >24V) are UL / MET / CSA certified 所有電氣部件( >24V)都有UL / MET / CSA 認證 The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. 可付費進行TUV(UL61010) or CSA 認證
|
