簡 介
電阻遠傳壓力表通過儀表內部的滑動電阻發送器把被測值以電量值傳至遠離測量點的二次儀表上, 以實現集中檢測和遠距離控制, 此外本儀表能夠同時就地指示壓力, (便于現場工藝檢查) 。本儀表還可
以與膜片隔離器(隔離體)連接,制成電阻遠傳隔膜壓力表,可測量腐蝕性較強、黏度大、易結晶介質的壓力。
BRIEF INTRODUCTION
Through the built-in adjustable resistance transmitter, 840 series gauges can transmit the measured values to the secondary gauges far from the site and achieve the concentrated examination and remote control. Meanwhile, the gauges can indicate the pressure value (for spot technical inspection). It can be connected with deaphragm insulator, making pressure gauge with resistance transmitter, Designed for strong corrosive, viscous and easy to be crystallographic media.
儀表由一個彈簧管壓力表和一個滑線電阻式傳感器組成,當被測壓力變化時,彈簧管端產生位移,一方面通過傳動系統使指針在度盤上指示相應壓力,另一方面帶動電刷在電阻上滑行,使被測壓力值的變化轉換為電阻值的變化,并傳至二次儀表上指示相應的壓力。
YTZ 主要技術參數 YTZ Specifications
測量介質:對銅合金無腐蝕作用氣體或液體 Medium: Gas or liquid, whice doesn’t corrode
(可與多類化學密封隔離器配 copper alloy (could be used in corrosion
接在各種腐蝕性的環境中使用) environments connected chemical seals.)
安裝方式:徑向直接安裝連接螺紋 M20 × 1.5 Mounting: Bottom connection direct
(或其他螺紋尺寸) thread M20× 1.5 or other
精度等級:1.5 級 Accuracy: 1.5%
外徑:150mm Diameter: 150mm
測量范圍:正壓:0.1MPa??60MPa; Range: Positive pressure 0.1MPa??60MPa;
負壓:-0.1~0MPa,-0.1~2.4MPa。 Negative pressure -0.1~0MPa, -0.1~2.4MPa
工作條件: Working condition:
環境溫度:-40~70℃ Ambient temperature: -40~70℃
相對濕度:≤ 85% Relative humidity: ≤ 85%
工作壓力:使用溫度偏離 20 ± 5℃時,其溫 Working pressure: When working temperature
度附加誤差不大于 0.4%/10℃ deviates from 20± 5℃. the
additional temperature error shall
not be more than 0.4%/10℃
滑線電阻發送器技術數據: Technical data of resistance tramsmitter
起始電阻:6~20Ω Start resistance: 6~20Ω
滿度電阻:340~400 Ω Full scale resistance: 340~400 Ω
接線端外加電阻:≤ 6V Connection end additional resistance: ≤ 6V
外殼材質:壓鑄合金鋁 Case: Cast aluminium alloy
接頭材質:銅合金 Socket material: Copper alloy
波登管:銅合金 Bourdon tube: copper alloy
表盤:鋁,白地黑字 Dial aluminum: white with black division
指針:鋁,黑色 Pointer: Aluminium, black
玻璃:普通玻璃 Glass: Window glass