成人免费黄色大片,国产福利电影一区二区三区,国产乱子伦清晰对白视频

DID-4數(shù)顯扭力起子

Screw tightening control

● DIGITAL TORQUE DRIVER 　DID-4M

(1) Unify the display sectiona frame. It became stronger.
(2) Display Measurement Mode, Unit, Etc. on Display Section.
(3) Data Output is USB Form.
(4) Prepare each button in accordance with operation.
Button operation became simple

＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed
＊Available in: lb-in, kg-cmN-m
＊Peak, Real TimePeak Down measuring mode (selectable)
＊800 data memory.
＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing
＊Programmable screw tightening counter
＊Programmable Auto Zero function resets unit to zero for easy operation
＊Both CWCCW operation
＊ASCII format output(USB)
＊Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use
＊ AC chargercarrying case included.

Specification		DID-4
Measuring range		0.020 - 4 N-m
		0.20～40 kgf-cm
		0.20～35 lbf-in
Accuracy		± 0.5% (in case of reading 499 or less = last digit +/- 3 reading)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Holding Peak Load Value
	T-R Track	Showing Real time torque value ( Used for Zero-Adjustment )
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about 1/ 160.
Decision function	Setting of torque value	Programmable HighLow setpoints with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format (Baud rate : 19200) When outputting data,the cable(USB miniB) is needed.
	Data memory	800 data / ten channels data
A setup of the number of counts		One to 99 count (count in a direction with a bundle)
Power supply		Ni-Cd chargeable battery 1.2V×4cells 600mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 5hours
Continunous working time		12 hours
Bit /Socket part		HEX6.35
Weight		about 400g
Attachment		Bit　（＋）　＃１?。＃病?/td>
Accessories (one piece each)		Dedicated AC/DC Adaptor (Charger),100～230VAC
		An inspection report, a proofreading certificate, a traceability system figure