Basic parameters
CT6862 CT6863
Rated current 50 A AC/DC 200 A AC/DC
Maximum allowable input 100 A continuous (requires reduced frequency or temperature) 400 A continuous (requires reduced frequency or temperature)
Frequency characteristics Amplitude: DC ~ 1 MHz
Phase: DC ~ 300 kHz Amplitude: DC ~ 500 kHz
Phase: DC ~ 300 kHz
Amplitude and phase accuracy DC ±0.05 % rdg. ±0.01 % f.s. (Phase: unlimited)
16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2 deg)
Specified to 1 MHz DC ±0.05 % rdg. ±0.01 % f.s. (Phase: Unlimited)
16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2 deg)
Specified to 500 kHz
Power consumption 5 VA max. (Power supply is 50 A/55 Hz, ±12 V) 6 VA max. (Power supply is 50 A/55 Hz, ±12 V)
Output voltage rate 2 V / rated current range (voltage output uses sensor unit 9555-10, using devices with output resistance of 1 Mohm or more)
Maximum rated voltage to ground AC/DC 1000 V (50/60 Hz, CAT III ) AC/DC 1000 V (50/60 Hz, CAT III )
Jaw diameter φ 24 mm (0.94 in) φ 24 mm (0.94 in)
Operating temperature and humidity -30 ° C ~ +85 ° C (86 ° F ~ 185 ° F), 80% rh or below (non-condensing)
Power supply DC ±11 V ~ ±15 V (power supply use 9555-10, 9555-10 requires 100 ~ 240 V AC)
Volume and weight 70W × 100H × 53D mm, line length: 3 m, 340 g 70W × 100H × 53Dmm, line length: 3 m , 350 g
Accessories Identification tape × 6, operation manual × 1
Note: Connect the oscilloscope or memory logger to power the caliper sensor.
9555-10 Basic parameters (power supply)
Applicable models 9270, 9271, 9272, 9272-10, 9277, 9278, 9279, 9709, CT6862, CT6863, one unit
Output BNC interface, sensor output signal
Power consumption AC converter 9418-15, AC 100 ~ 240V, 50/60Hz, 20VA Max.
Volume and weight 42mm W × 82mm H × 132mmD, 600g
Accessories AC Converter 9418-15 × 1
會(huì)員1.png)
