德國PTL低溫撞擊沖擊試驗裝置IEC60670-1 IE C60811-1-4*低溫沖擊測試儀詳情：
德國PTL低溫撞擊沖擊試驗裝置
品牌：德國PTL
型號：T16.10
根據：
IEC 60670-1 / 2002-12 &15.1 Fig. 8 1), IEC 60811-1-4 / 1985 + Corrigendum May1986+A1/1993-09 + A2 / 2001-07&8.5 Fig. 2,
IEC 60884-1 / 2002-06&24.4 Fig. 27 (and &30.4 Fig. 42 1)), EN 60811-1-4 / 1995-04 + A2 / 2001 &8.5 Fig. 2,
VDE 0473 Part 811-1-4/2002-09 & 8.5 Fig.2, VDE 0620 Part 1/2002-01&24.4 Fig. 28 (and &30.4 Fig. 41 1)等標準。
對于這些，需要物品號為T(mén)16.4直徑為6mm,的中間。
用途：以確定絕緣電線，電纜，耦合器，插頭的插腳絕緣套管外殼在寒冷環境下的機械強度。
德國PTL低溫撞擊沖擊試驗裝置IEC60670-1 IE C60811-1-4*低溫沖擊測試儀配備標準：
1 鋼座，高40mm,寬約200mm,質量10kg
2 柱，上端有螺絲的固定橫梁
1 下橫梁，高度容易調節，是落錘的釋放桿
1 導桿，三棱，邊緣稍微有點圓。下落高度達100mm，樣品的zui大高度為40mm
1 中間鋼，直徑20mm,底端圓形R=300mm,質量 100g
設計：
鋼塊涂底漆和涂草紙白結構漆，鋼板上面呈棕色，其他部分為不銹鋼材料或鍍鎳，底座160mm×200mm，總高度約450mm不包括海綿墊。
Standard outfit: steel block, height 40 mm, width approx. 200 mm, mass 10 kg, 2 columns, inclusive of upper crossbeam with fixing screw, lower crossbeam, easy adjustment of height, with releasing lever for the falling weight, guide rod, three-edged, with slightly rounded edges, for heights of fall up to 100 mm with maximum height of sample 40 mm, intermediate piece of steel, diameter 20 mm, bottom side rounded R = 300 mm, mass 100 g.
Design:steel block primed and papyrus-white structure varnished, upper side of steel block browned, all other parts of stainless materials or nickel-plated, base 160 mm x 200 mm, total height
approx. 450 mm without sponge rubber pad, Article No.: T 16.10
Alternative:
PTL PTL Low Temperature Ram Impact Test Apparatus 14
as above, however for heights of fall up to 300 mm with max. height of sample 70 mm
total height without sponge rubber pad approx. 700 mm, Article No.: T 16.14
Accessories:
Intermediate piece of steel, mass 100 g, with striking bolt of diameter 6 mm, length
20 +1 mm, for tests according to the standards marked with 1), Article No.: T 16.41
Falling weights, with collar for the releasing lever, of browned steel,
weight: 100 g 200 g 300 g 400 g 500 g
Article No.: T 16.51 T 16.52 T 16.53 T 16.54 T 16.55
weight: 600 g 750 g 1000 g 1250 g 1500 g
Article No.: T 16.56 T 16.57 T 16.58 T 16.59 T 16.60
Complete set , consisting of 1 piece T 16.51 to T 16.60 each, Article No.: T 16.70
Sponge Rubber Pad, as a base for the steel block, approx. 180 mm x 220 mm, 40 mm thick, density approx. 370 kg/m3, open cell, Article No. T 16.71
Sponge Rubber Pad, as above, but according to IEC60670-1/2002-12&15.1, density approx. 538 kg/m3, closed-cell, on request
PTL low temperature ram impact test apparatus exactly according to VDE 0604 Part 1 /May 1986 $8.4 Fig. 4 or according to DIN 72 551 Part 5 / 1993-02: on request
專業代理銷售德國PTL、WAZAU等品牌檢測儀器。擁有價格優勢，現貨、原裝、*、可靠！保證滿意?。?！
