Hawke 501/423 Cable Gland（霍克电缆接头）
Application
The 501/423 cable gland provides two independent seals on non-armoured elastomer and plastic insulated cables. The first is a flameproof seal on the inner or outer cable sheath, with an additional IP seal on the outer sheath. The cable gland is dual certified Exd and Exe and is suitable for installation in Zone 1 （21） and Zone 2 （22） hazardous areas.
Features
Provides superior cable retention to standard unarmoured cable glands, with seal at two independent points.
When used in increased safety applications, this cable gland may be used with braided cable where the braid and the outer sheath pass into the enclosure. The braid must be suitably terminated inside the enclosure.
Material & Finishes
The 501/423 cable gland is manufactured in Brass （standard）, Nickel Plated Brass, 316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.
Technical Data
Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
Baseefa Certificate No. Baseefa06ATEX0056X.
IECEx Certificate No. IECEx BAS 06.0013X.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1.
Ingress Protection: IP66, IP67 and IP 68 （30 metres for 7 days） to IEC/EN 60529 and NEMA 4X.
Deluge protection to DTS01.
Operating Temperature Range: -60°C to +100°C.
Alternative certification options available:
Exe II. Certificate No. 1015065 （LR 78713-7）.
BR-Exd IIC/Exe II. Certificate No. CEPEL 01.0060X.
GOST R-Exe IIU.
Exd IIC/Exe II.
GOST K - Approved for use in Kazakhstan.
Marine Approval. Certificate No. 06-LD142850A-PDA.
Marine Approval
Hawke 501/423 Cable Gland
| CABLE GLAND SELECTION TABLE | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. | Entry Thread Size | Thread Length ‘H’ | Cable Acceptance Details | ‘G’ Compressed Length | Hexagon Dimensions | ||||||
| Outer Sheath ‘B’ | |||||||||||
| Metric | NPT * | Standard Seal | Alternative （S） Seal | Across Flats | Across Corners | ||||||
| Standard | Option | Min. | Max. | Min. | Max. | ||||||
| Os | M20 ‡ | ½" | - | 15.0 | 3.2 | 8.0 | - | - | 40.0 | 24.0 | 26.5 |
| O | M20 ‡ | ½" | - | 15.0 | 6.5 | 11.9 | - | - | 40.0 | 24.0 | 26.5 |
| A | M20 | ¾" | ½" | 15.0 | 10.0 | 14.3 | 9.0 | 13.5 | 40.4 | 30.0 | 32.5 |
| B | M25 | 1" | ¾" | 15.0 | 13.0 | 20.2 | 9.5 | 15.4 | 44.3 | 36.0 | 39.5 |
| C | M32 | 1¼" | 1" | 15.0 | 19.5 | 26.5 | 15.5 | 21.2 | 47.2 | 46.0 | 50.5 |
| C2 | M40 | 1½" | 1¼" | 15.0 | 25.0 | 32.5 | 22.0 | 28.0 | 49.5 | 55.0 | 60.6 |
| D | M50 | 2" | 1½" | 15.0 | 31.5 | 44.4/42.3 † | 27.5 | 34.8 | 72.5 | 65.0 | 70.8 |
| E | M63 | 2½" | 2" | 15.0 | 42.5 | 56.3/54.3 † | 39.0 | 46.5 | 64.8 | 80.0 | 88.0 |
| F | M75 | 3" | 2½" | 15.0 | 54.5 | 68.2/65.3 † | 49.5 | 58.3 | 68.0 | 95.0 | 104.0 |
| G | M80 | 3½" | - | 20.0 | 67.0 | 73.0 | - | - | 68.0 | 106.4 | 115.0 |
| H | M90 | 3½" | - | 20.0 | 67.0 | 77.6 | - | - | 68.0 | 115.0 | 130.0 |
| J | M100 | 4" | - | 20.0 | 75.0 | 91.6 | - | - | 68.0 | 127.0 | 142.0 |
| All dimensions in millimetres （except * where dimensions are in inches）. Os - F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard （1.5mm pitch with 15mm length of thread can be supplied） please specify when ordering. † Smaller value is applicable when selecting reduced NPT entry option. ‡ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9 mm. | |||||||||||
Ordering Information
Cable Gland Type/Size/Thread
e.g. 501/423/C/M32
501/423/C/1¼" NPT
Ordering Information with Alternative Seal （S）
Cable Gland Type/Size/Thread/S
e.g. 501/423/C/M32/S
501/423/C/1¼" NPT/S
- Cable Gland Accessories
- Assembly Instructions
- Cable Gland Data Sheet
上海颐品自动化科技有限公司代理分销HAWKE铠装防爆接头（Hawke Atex cable gland），HAWKE铠装防爆电缆接头，有UL，CSA，ATEX防爆认证等。
HAWKE是美国HUBBELL集团的一个子公司，是用于危险区域的电气设备的的制造商，向提供不断创新的电缆连接和终端产品。危险区域爆炸、火灾的危险经常存在，安全极为重
要，我们的电缆密封接头则是该情况下确保安全的极为有效的产品。HAWKE有适用于所有类型电缆（铠装/编织）的产品，并提供工业，增安，和隔爆各种应用类型的解决方案。
EPIN代理分销英国Hawke铠装防爆接头（Hawke Atex cable gland armed）所有的电缆密封接头都在欧洲全面通过测试和BASEEFA认证，符合ATEX等级规则，包括zui近执行的一系列成套设备规则和
专门用于具有潜在可爆炸性气体环境下的保护性系统。还有其他认证:CSA,CEPEL,GOSTR,KAZAKH PERMIT和AUS. 产品广泛应用于石油化工，天然气，石油钻井平台等要求防爆的领域。
EPIN代理分销英国Hawke铠装防爆接头（Hawke Atex cable gland armed），以下是几个产品系列的产品特点：
Hawke 501/421系列的特点：Hawke 501/421系列的电缆密封接头在电缆护套的外层提供密封，适用于非铠装的橡胶和塑料电缆。经过隔爆和增安双重验证，适用于危险区域1（21）和区域2（22）
。
Hawke 501/453 UNIV电缆接头的特点： Hawke 501/453 UNIV系列电缆密封接头在电缆护层内提供隔爆密封，护层外提供IP防水防层密封，应用反向铠装（RAC）技术，适用于所有类型的铠装或编织
电缆（W，X，Z）该电缆密封接头特别适用于那些带有会出现“冷变形”特征的柔软内护层的电缆，因为内部的隔膜密封套避免了对电缆护层的破坏。
该电缆密封接头通过隔爆和增安双重验证，适用于安装在区域1（21）和区域2（22）的危险场所
Hawke ICG 653/UNIV电缆接头的特点：Hawke ICG 653/UNIV系列电缆接头为各种绝缘电缆裸线提供隔爆密封套，防止防爆物质进入电缆周围，在电缆外部护层提供IP与外界环境隔离密封。该电缆接
头适用于那些不方便穿入和带有会出现“冷变形”状况的柔软内护层的电缆，因为内部的隔膜密封套避免了对电缆护层的破坏。
该电缆密封接头通过隔爆和增安双重验证，适用于安装在区域1（21）和区域2（22）的危险场所。
Hawke 501/453/RAC电缆密封接头的特点：Hawke 501/453/RAC系列电缆接头在电缆护层内提供隔爆密封，护层外提供IP防水防层密封，应用反向铠装（RAC）技术，适用于所有类型的铠装或编织电
缆（W，X，Z）该电缆密封接头通过隔爆和增安双重验证，适用于安装在区域1（21）和区域2（22）的危险场所
Hawke 753电缆接头的特点：Hawke 753系列电缆接头于编织铠装电缆，包皮电缆和非包皮电缆。该接头给电缆芯线提供防爆360度密封，在电缆外护层提供IP防尘防水密封。通过编织铠装装
置实现良好的电缆机械维系性和接地性能。该电缆接头符合安全UL LISTED 标准，适用于CLASS 1 DIVISION 1和CLASS 1 ZONE 1。
Hawke 711电缆接头的特点：Hawke 711系列电缆接头于连接波纹铝和金属镀层（MCHL）型电缆，该接头给电缆芯线提供360度防爆密封，在电缆外护层提供IP防层防水密封。
该电缆接头符合安全UL LISTED 标准，适用于CLASS 1 DIVISION 1和CLASS ZONE 1。【EPIN AUTOMATION】
