進口分步直動式電磁閥（德國進口RBT品牌）
進口分步直動式電磁閥工作原理:
常閉：當線圈通電時，電磁力先打開先導孔，主閥活塞上腔壓力下降，從而利用壓差和電磁力吸動先導閥芯連動主活塞，電磁閥打開。 當線圈斷電時，靠彈簧復位關閉先導孔，主活塞上腔增壓，推動主活塞向下移動，電磁閥關閉。
常開：常開與常閉相反。
注：出口端壓力大于進口端壓力時，介質會反向導通?？砂惭b止回閥或訂制帶止回功能的電磁閥。
Import stepped direct-acting solenoid valve working principle:
Normally closed: when the coil is energized, the electromagnetic force to open the pilot hole, the main valve piston chamber pressure drops, thus the use of pressure and electromagnetic force sucking the pilot valve core linking the main piston, the electromagnetic valve is opened. When the coil power, by the reset spring close the pilot hole, the main piston cavity pressure, promote the main piston moves down, the electromagnetic valve is closed.
Normally open: normally open and normally closed instead.
Note: outlet pressure is greater than the inlet pressure, the medium will reverse
conduction. Electromagnetic valve check valve can be installed or ordered with non-return function.
進口分步直動式電磁閥產(chǎn)品參數(shù):
產(chǎn)品規(guī)格：DN1~DN20（小口徑）DN25~DN150（中大口徑）
閥體材質：不銹鋼304、316。
適用介質：氣、水、油、蒸汽、燃氣、腐蝕性流體。
介質溫度：-200~+450℃。
介質粘度：小于50CSt （大于50時需定制）。
防護性能：防水、防爆（Exd IICT5）、防腐。
閥芯材質: 均為不銹鋼。
接線方式：接線座式、引線式、插頭式。
控制方式：常閉、 常開。
電源電壓：DC12~127V；AC36~380V。
連接方式：內螺紋、（外螺紋和特殊接口可定做或加轉接頭）
泄 漏 量：零
備注：特殊型可定制。
Import direct-acting solenoid valve product parameters:
Product specifications: DN1~DN20 （small diameter） DN25~DN150 （large diameter）
Body material: stainless steel 304, 316.
Suitable medium: air, water, oil, steam, gas, corrosive fluid.
Medium temperature: -200~+450 ℃.
Medium viscosity: less than 50CSt （greater than 50 required custom）.
Protective performance: waterproof, explosion-proof, anti-corrosion （Exd IICT5）.
Core material: stainless steel.
Connection: connection seat type, lead type, plug.
Control mode: normally closed, normally open.
The power supply voltage: DC12~127V; AC36~380V.
Connection: thread, （external thread and special interface can be customized or adapter）
The leakage quantity: Zero
Note: special type can be customized.
德國羅博特RBT閥門有限公司中國一級代理商（上海波昂銷售處）