1、定義與用途
序 號 No. | 項 目 Item | 單 位 Unit | 試驗方法 Testing Method | 指 標 Indication |
物 理 性 能 Physical Properties | ||||
1 | 密度Density | g/cm3 | GB/T5130 | ≥1.8 |
2 | 3248玻璃纖維含量 Glass Fibre Content | % | —— | ≥60 |
3 | 吸水性(10mm) Water Obsorption | mg | GB/T5130 | ≤34 |
4 | 熱膨脹系數 Thermal Expansion Coefficient | 1/℃ | GB/T1036 | 11.1×10-6 |
5 | 導熱系數 Coefficient of Heat Conductivity | w/m.k | —— | 0.46 |
機 械 性 能 Mechanical Properties | ||||||
6 | 垂直層向 彎曲強度 Flexural Strengthat perpendicular to lamination | 常態(23+2)℃ Under normal | MPa | GB/T5130 | ≥410 | |
熱態(150+5)℃ At heat | MPa | ≥240 | ||||
7 | 3248彎曲彈性模量 Modulus of Elasticity in Flexure | MPa | ≥24900 | |||
8 | 壓縮強度 Compressive strength | 垂直層向 At perdicular lamination | MPa | ≥350 | ||
平行層向 At parallel to lamination | MPa | ≥200 | ||||
9 | 拉伸強度Tensile strength | 縱向Lengthwise | MPa | ≥314 | ||
橫向Crosswise | ≥300 | |||||
10 | 沖擊強度 (簡支梁) Impact strength charp | (無缺口) No notch | 縱向Lengthwise | kJ/ m2 | ≥160 | |
橫向Crosswise | ≥120 | |||||
(缺口) Notched | 縱向Lengthwise | ≥40 | ||||
橫向Crosswise | ||||||
11 | 3248粘合強度 Bonding strength | N | Q/JBQP51 | ≥7660 | ||
12 | 平行層向剪切強度 Shear strength at parallel to lamination | MPa | GB/T5130 | ≥30 | ||
13 | 洛氏硬度 Rochwell strength | HRM | GB/T9342 | ≥115 |
電 氣 性 能 Dielectric Properties | |||||
絕緣電阻 Insulation Resistance | 常態下 Under normal | MΩ | GB/T5130 | ≥1.0×106 | |
浸水(24+1)h后 After Immersion for24+1h | ≥5.0×104 | ||||
電氣強度 (于90℃+2℃變壓器油中1min) Dielectric strength in transformer oil at 90℃ for 1 min | kv/mm | ≥14.2 | |||
3248平行層向耐電壓 (于90℃+2℃變壓器油中1min) Proof voltage in transformer oil at 90℃ for 1 min | KV | ≥45 | |||
介質損耗因數(于浸水后,1MHz時) Dielectric loss factor after immersion at 1MHz | | ≤0.04 | |||
介質常數(于浸水后,1MHz時) Dielectric loss Constant after immersion at 1MHz | | ≤5.5 | |||
表面電阻率 Surface Resistivity | 常態Under normal | MΩ | GB/T1410 | ≥1.0×107 | |
浸水(23+2℃/24h) After Immersion of 23+2℃ for 24th | ≥1.0×105 | ||||
體積電阻率 Volume Resistivity | 常態 Under normal | MΩ.m | ≥1.0×105 | ||
浸水(23+2℃/24h) After Immersion of 23+2℃ for 24th | ≥1.0×103 | ||||
相比電痕化指數 Comparative Trackling Index | | GB/T4207 | ≥200 |
耐 熱 性 能 Thermal Properties | ||||
玻璃化轉變溫度Tg Glass Transition Temperature | ℃ | IEC61006 | ≥172 | |
熱壓收縮率 Reduction rate of Heat press | % | 參考ASTMD621 | ≤0.40 | |
溫度指數 Thermal Index | | GB/T11026.1 | ≥155 |