DDC-JQ 真空電磁閥:
電磁閥一般流通系數很小,而且工作壓力差很小。比如一般25口徑的電磁閥流通系數比15口徑的電動球閥小很多。電磁閥的驅動是通過電磁線圈,比較容易被電壓沖擊損壞。相當于開關的作用,就是開和關2個作用。
電磁閥一般斷電可以復位,電動閥要這樣的功能需要加復位裝置。
DDC-JQ電磁真空帶充氣閥 | DDC-JQ型電磁真空帶充氣閥是機械真空泵安全閥,安裝于機械真空泵的進氣口,并與泵同步開啟和關閉。當泵停止工作或電源突然中斷時,閥門自動關閉。使真空系統保持真空并將大氣充入泵腔內,從而避免泵油逆向流動而污染真空系統。適用介質為純凈空氣和非腐蝕性氣體。 | | | ■ | DDC-JQ Electro-vacuum Charging Valve | | | ■ | DDC-JQ electro-vacuum charging valve is a safety valve for vacuum, pump. It is mounted at the intake nozzle of vacuum pump, synchronously openedclosed with the vacuum pump. In case that vacuum pump stops working or power supply is suddenly broken off, valve will be cosed automatically to keep the vacuum system vacuumthe air charged into the cavity of vacuum pump, thus to prevent pump oil from reverse flow that can pollute the vacuum system. Applicable medium can be pure airnoncorrosive gases. | | | ■ | 主要技術性能 Main Technical Performance | | | ■ ■ ■ | 適用范圍:Applicability | 105~10-2Pa | 閥門漏率:Valve Leak Rate | ≤6.7×10-3Pa.L/S. | 適用溫度:Applicability | -30~+50℃ | 線圍溫升:Coil Temperature Rise | ≤65℃ | 開閉時間:Open-close Time | ≤3S | 電源電壓:Mains Voltage | 220V/50Hz | | | | ■ | 主要零件材料 Materials of Main Parts | | | ■ ■ | 閥體、閥蓋、閥板:碳鋼或鋁合金 密封圈:丁腈橡膠 Body, bonnetdisc: carbon steel or aluminium alloy Seal ring: NBR | | | CONSTRUCTION FIGHTSmm | | ■ | 外形及連接尺寸mmJB919 OverallConnection Dimensionsmm | | | Model 型號 | DN | h | B | H | D | Do | D1 | n-d | Machineal pump 機械泵匹配參考 | DDC-JQ16 | 16 | 28 | 48 | 176 | 68 | 42 | 22 | 4-M5 | 2XZ-0.5~1 | DDC-JQ25 | 25 | 35 | 58 | 199 | 82 | 55 | 29 | 4-M6 | 2XZ-2~4 | DDC-JQ32 | 32 | 40 | 68 | 222 | 92 | 64 | 36 | 4-M6 | 2XZ-4 | DDC-JQ40 | 40 | 44 | 80 | 253 | 110 | 70 | 44 | 4-M6 | 2XZ-8 | DDC-JQ50 | 50 | 56 | 94 | 294 | 124 | 90 | 55 | 4-M8 | 2X-15 | DDC-JQ65 | 65 | 65 | 115 | 320 | 135 | 105 | 70 | 4-M8 | 2X-30 | DDC-JQ80 | 80 | 75 | 140 | 367 | 165 | 125 | 85 | 4-M8 | 2X-70 | | |
訂貨須知 訂貨時請?zhí)顚憽兑?guī)格書》或注明以下內容: 一、若訂貨前還未選定型號,請向我們提供您的使用參數:1.公稱通徑,2.流體性質(包括公稱壓力、溫度、粘度或酸堿性),3.執行機構型號,4.閥體、閥芯材料,5.閥作用形式(電-關式或電-開式),6.電源電壓。以便我們的為您正確選型。 二、若已經由設計單位選定我公司的產品型號,請按型號直接向我司銷售部訂購; 三、當使用的場合非常重要或管路比較復雜時,請您盡量提供設計圖紙和詳細參數,由我們的專家為您審核把關。 | | |