CQL Gas-liquid-solid mixd transmission Magnetic Drivien Pump
CQL型泵通過內外磁轉子進行耦合傳動,外磁轉子與電機直聯,隔離套將內磁轉子密封在泵腔內,運用磁力密封與氮氣阻隔組合,從根本上解決了含固體顆粒、含氣體介質的輸送難題。
適于輸送低固相、分散的固體顆粒懸浮液,是一種典型的可輸送含固體顆粒物的磁力泵。
Model CQL pump is driven by coupled internal and external magnetic rotors. The external magnetic rotor is directly connected to the motor. An isolation sleeve seals the internal magnetic rotor inside the pump cavity. Magnetic sealing is combined with nitrogen blocking, solving the difficult problem of conveying media containing solid particles and gas.
These pumps are applicable to conveying low solid phase, distributed solid particles suspension liquid, being a typical magnetic drive pumps capable of conveying media containing solid particles.
結構說明 Description of structure
2、通過磁性聯軸器驅動,磁力密封與氮氣阻隔組合配置,全密封、無泄漏。
3、軸向力利用流體力學原理自動平衡。
4、優化的葉輪水力設計,適宜含雜質、含固體顆粒的物料輸送。
5、葉輪水力設計配套動力密封運行,防止了汽蝕破壞,在邊界條件下都是安全的。
6、泵的結構可以實現長時間干運轉,磁傳動及軸承部件壽命長。
7、泵入口處于系統的位,排除泵內積液比較方便和迅速。
8、泵及電機裝配好之后整體被固定在底架上,安裝方便。
2. Driven by magnetic coupling; magnetic sealing combined with nitrogen blocking; fully sealed;
3. Automatic balance of axial force using fluid mechanics principle
4. Optimized impeller hydraulic design suitable for conveying materials containing impurities
and solid particles
5. Impeller hydraulic design plus operation of matching dynamic seal prevents cavitation effect
and allows safety under all boundary conditions.
6. The pump structure fully realizes long dry operation and long service life of magnetic drive
and bearings.
7. Pump inlet is at lowest part of the system, allowing easy and quick discharge of accumulated
liquid in the pump.
8. After assembling of pump and motor, they are fixed on the underframe as an integral machine,
hence the installation is easy.
流量Flow: 5.5~1100m3/h
揚程Lift: 4.5~130m
介質溫度Media temperature: -45℃~+250℃
法蘭壓力等級Flange pressure rating: 2.5MPa
型號意義 Type denotation

