交聯聚乙烯絕緣控制電纜XPLE insulated Control Cable
一、適用范圍 Application
本產品用于額定電壓450/750V及以下控制、監控回路及保護線路等場合
Applicable to the control system，control loop and protectioncricuit with the rated voltage 450/750V(or lower).
二、執行標準
GB/T9330.3-2008
lmplementation ofstandards
GB/T9330.3-2008
三、使用特性
1.導體**工作溫度90C。
2.安裝敷設時環境溫度不低于0C。
安裝敷設時最小彎曲半徑:無鎧裝6 X電纜外徑，有屏蔽層軟電纜36X電纜外徑，有鎧裝或銅帶屏蔽12X電纜外徑
Using characteristics
1、The max working temperature of conductor(of a cablelis 90℃。
2、The ambient temperature for laying is not lower than 0℃。
3、The least allowed bending radius: steel tape-armoredcable is 6 times the outer diameter of the cable : 6 timesthe outer diameter of the cable(the screen soft cable):steel tape-armored or Cu tape armored shield calble is12 times the outer diameter of the cable
四、型號、名稱 TypeandDenomination
型號 Type | 產品名稱 Denomination |
| KYJV,KYJY | 交聯聚乙烯絕緣聚氯乙烯(聚烯烴)護套控制電纜 Cross-linked polyethylene insulated PVC sheathed control cable (polyolefin) |
| KYJVP,KYJYP | 交聯聚乙烯絕緣編織屏蔽聚氯乙烯(聚烯烴)護套控制電纜 Cross-linked polyethylene insulation weaving to PVC sheathed control cable (polyolefin) |
| KYJVP2,KYJYP2 | 交聯聚乙烯絕緣銅帶屏蔽聚氯乙烯(聚烯)護套控制電纜 Cross-inked polyethylene insulated copper tape screened PVC sheathed control cable (polyolefin) |
| KYJVP3.KYJYP3 | 交聯聚乙烯絕緣鋁塑復合帶屏蔽聚氯乙烯(聚烯烴)護套控制電纜 Cross-linked polyethylene insulation composite tape screened PVC sheathed control cable (polyolefin) |
| KYJV22,KYJY23 | 交聯聚乙烯絕緣鋼帶鎧裝聚氯乙烯(聚烯烴)護套控制電纜 Cross-linked polyethylene insulating tape armored PVC sheathed control cable (polyolefin) |
| KYJVP2-22,KYJYP2-23 | 交聯聚乙烯絕緣銅帶屏蔽鋼帶鎧裝聚氯乙烯(聚烯烴)護套控制電纜 Cross-linked polyethylene insulated copper tape BingBiGang tape armored PVC sheathed control cable(polyolefin) |
| KYJV32,KYJY33 | 交聯聚乙烯絕緣細鋼絲鎧裝聚氯乙烯(聚烯烴)護套控制電纜 Cross-linked polyethylene insulation weaving fine steel wire armored PVC sheathed control cable(polyolefin) |
五、規格范圍 Specification range
型號 Typ | 標稱截面mm2 Nominal cross section area mm2 | ||||||
| 0.75 | 1.0 | 1.5 | 2.5 | 4 | 6 | 10 | |
芯數 Core NO. | |||||||
KYJV,KYJVP, KYJY,KYJYP | 2-61 | 2-14 | 2-10 | ||||
KYJVP2,KYJVP3, KYJYP2,KYJYP3 | 4-61 | 4-14 | 4-10 | ||||
| KYJV22,KYJY23 | 7-61 | 4-61 | 4-14 | 4-10 | |||
| KYJVP2-22,KYJYP2-23 | 7-61 | 4-61 | 4-14 | 4-10 | |||
| KYJV32,KYJY33 | 19-61 | 7-61 | 4-14 | 4-10 | |||
六、主要技術參數 Technolgicalparameters
序號 No | 項目 Project | 單位 Unit | 指標 Index | 試驗方法 Test method |
| 1 | 電纜結構及導體電阻 Cable structure and conductor resistance | 符合GB/T3956-2008標準(IEC60228:2004) Complies with the standard ofGB/T3956-2008(IEC60228:2004) | GB/T3048.4-2007 | |
| 2 | 絕緣線芯交流50Hz火花試驗 Spark test(AC.Voltage 50Hz) | KV | 6 | GB/T3048.9-2007 |
| 3 | 工頻5min電壓試驗 Frequency(5min)voltage test | KV | 3 | GB/T3048.8-2007 |
| 4 | 絕緣線芯電壓試驗 Insulation voltage test 0.6mm及以下≤0.6mm 0.6mm及以上=0.6mm | KV | 2 2.5 | GB/T3048.8-2007 |
