產品特點:
1.客制化設計，雙層或多層，節約場地
2.節能設計，電子膨脹閥，純銅蒸發器，316不銹鋼加熱器
3.全面安全全設計，水電分離，三重超溫保護，泄壓口、煙霧報警器、噴淋等
4.精選國內外品牌零配件:泰康，比澤爾，日立，松下等壓縮機；西門子，丹佛斯，鷺宮，德力西等元器件。
可選配件:
1.測試孔:Φ50和100mm可選，數量可選
2.加濕系統:可選配RO逆滲透純水機和電子濕度傳感器
3.電源插座:AC220V(10A~20A)多功能插座
4.煙感探測系統
5.噴淋系統
6.泄壓裝置
技術規格表 Technical Parameter
室溫為+25℃和循環水溫+25℃，無試樣條件下測得的數據（The data were measured without samples at room temperature +25℃ and the circulating water temperature +25℃）
標準容積 Standard Volume | 雙層306L | 三層306L | 四層510L |
內箱尺寸（mm） Internal Dimensions | W850*H600*D600 | W850*H600*D600 | W1700*H400*D750 |
外箱尺寸（mm） External Dimensions | W1050*H1935*D1687 | W1050*H2787*D1680 | W1900*H2535*D1930 |
溫度范圍 Temperature Range | -40℃~100℃(溫度連續可調Temperature continuously adjustable) | ||
溫度偏差 Temperature Deviation | ±2℃ | ||
溫度波動度 Temperature Fluctuation | ±0.5℃ | ||
溫度均勻度 Temperature Uniformity | 2℃ | ||
升溫速率 Heating Rate | ≥1℃/min（25℃~+100℃ 空載，全程平均No load, Whole course average） | ||
降溫速率 Cooling Rate | ≥1℃/min（25℃~-40℃ 空載，全程平均No load, Whole course average） | ||
泄壓裝置 Pressure Relief Device | 每層箱體均配備一個泄壓口，每個泄壓門安裝1條Φ10mm防爆鏈 Each compartment of the equipment is equipped with a pressure relief vent, and each pressure relief door is fitted with a Φ10mm explosion-proof chain for added safety. | ||
兩路溫度保護裝置 Two way Temperature Protection Device | 除主溫度傳感器外，設備還配備輔溫度探頭，即觸摸屏顯示兩路溫度，溫度輔助監控與主監控溫度偏差超過設定范圍，控制器可報警，可以設定是否要停機 In addition to the primary temperature sensor, the equipment is also equipped with an auxiliary temperature probe, which means that the touchscreen displays two temperature readings. If the temperature deviation between the auxiliary temperature monitoring and the primary monitoring exceeds the set range, the controller can trigger an alarm. Furthermore, there is an option to configure whether to stop the equipment in response to this alarm. | ||
滅火裝置（選配） Fire Exting uishing Device (Optional) | 設備每層箱體有單獨的噴淋設計，可以手動或自動控制，用于樣品失效時的滅火 Each compartment of the equipment is equipped with an individual spray system, which can be controlled manually or automatically. This system is designed for fire suppression in case of sample failure or other fire-related incidents. | ||
煙霧報警器 Smoke Alarm | 當測試物冒煙時，啟動煙霧報警裝置 When the test specimen emits smoke, the smoke alarm system is activated. | ||
冷卻方式 Cooling Method | 水冷（可選配風冷） Water-cooled (Optional Air-cooled) | ||
電源電壓 Voltage Supply | AC380V + 50/60HZ | ||
總功率 Gross Power | 8KW | 12KW | 28KW |
參考標準 Reference Standard | GB/T 2423.1-2008 低溫試驗方法 GB/T 2423.2-2008 高溫試驗方法 GB/T 2423.3-2016 恒定濕熱試驗方法 GJB150.9A-2009 裝備實驗室環境試驗方法-濕熱試驗 GJB150.3A-2009 裝備實驗室環境試驗方法-高溫試驗 GJB150.4A-2009 裝備實驗室環境試驗方法-低溫試驗 GB/T 2423.4-2008 交變濕熱試驗方法（選配） | ||
備注:JJF-1101-2019
本產品可進行定制，具體選型請咨詢銷售人員
This product can be customized, please contact with the sales
