鐵氟龍鍍銀屏蔽線PT100熱電阻補償導線測溫線
一、鐵氟龍鍍銀屏蔽線PT100熱電阻補償導線測溫線線產品執(zhí)行標準 企標
Executive standard: enterprise standard
二、型號
| 型號 Type | 名稱 Name |
| AFPXR200 | 熱電阻高溫屏蔽電線 high temperature cable special for thermal resistance |
三、鐵氟龍鍍銀屏蔽線PT100熱電阻補償導線測溫線使用特性
operating characteristics
1、交流額定電壓：U0/U 300/300V
A.C. rated voltage: U0/U 300/300V
2、工作溫度：電纜導體長期工作溫度為260℃。
Long term operating temperature of cable conductor is 260℃.
3、AFPXR-200-PT100熱電阻鍍銀高溫連接線導體：多股鍍銀銅絲。
Cable conductor consists of multi-strａnd silver plated core wire.
4、彎曲半徑：電纜彎曲半徑不低于電纜外徑的6倍。
Bending radius of cable shall be no less than 6 times that of cable outer diameter.
5、阻燃特性：符合GB19666-2005。
Flame resistant characteristic shall meet the requirements speculated in GB19666-2005 standard.
四、技術性能
Performance parameter
| 項目 Item | 單位 Unit | 技術指標 Technical Indices | |||
| 20℃時導體直流電阻≤ Conductor DC Resistance at 20℃ | Ω/KM | 截面 Cross section | 0.2 | 0.3 | 0.5 |
| 電阻 Resistance | 83.5 | 49.5 | 30.2 | ||
| 試驗電壓 test voltage | V | 1.5KV，5min不擊穿。 Finished cable shall endure 1.5kv voltage test for 5 min without puncture. | |||
| 絕緣電阻 Insulated resistance | MΩ | 500 | |||
AFPXR-200-PT100熱電阻鍍銀高溫連接線
五、結構尺寸
External dimension
| 型號 type | 規(guī)格 Specifications | 參考外徑 Reference diameter |
| AFPXR200 | 1*2*0.2 | 1.2*2.8 |
| AFPXR200 | 1*2*0.3 | 1.3*3.2 |
| AFPXR200 | 1*2*0.5 | 1.6*3.8 |
| AFPXR200 | 1*3*0.2 | 3.1 |
| AFPXR200 | 1*3*0.3 | 3.4 |
| AFPXR200 | 1*3*0.5 | 4.0 |
六、鐵氟龍鍍銀屏蔽線PT100熱電阻補償導線測溫線示意圖
The figure of cable structure
七、注意事項
Notes
施工時嚴格防止電纜損傷，降低產品性能。
Cable damage and performance reduction are strictly prevented during installation.
八、交貨要求
Delivery requirement
允許根據雙方協(xié)議長度交貨；長度誤差不超過±5%。
Delivery length of cable depends on both agreements with length error allowance of ±5%.
