型號描述
水壓力調節器根據減壓準則進行工作。首先擬定在水設備中的使用。壓力調節器由外殼和帶有可調節彈簧和彈力帽的活塞閥或隔膜閥組成。入口壓力達到額定值時，活塞閥或隔膜閥抗彈力打開調節閥，建立出口壓力。出口壓力即是調節值。若超過額定值，則閥門關閉，在超過狀態下，打開和保持調節好的出口壓力，使其趨于穩定。通過改變預壓，不斷匹配額定值。 壓力調節器有四個規格可用： - 規格 1 ：經 DIN DVGW 和國際飲用水認證的測量殼體 ?-規格 2 ：經 DIN DVGW和國際飲用水認證的帶有可控制過濾器的測量殼體 ?-規格 3 ：經 DIN DVGW 認證的不銹鋼殼體 ?-規格 4 ：塑料殼、G1/8 和 G1/4 聯軸節聯接
1）經 DIN DVGW 和國際飲用水認證的測量規格
2）經 DIN DVGW 認證的不銹鋼規格
3）緊湊型塑料規格
4）出口壓力處的壓力計接口
Type Description
The water pressure regulator works on the principle of pressure reduction. It is preferably for use in the provided water systems. The pressure regulator consists of a housing, a piston or diaphragm valve with an adjustable spring and a spring cap. The inlet pressure reaches the target value, opens the piston or diaphragm against the spring force of the control valve and builds up the output pressure. The output pressure is the controlled variable. When exceeding the nominal value the valve closes, when there is a shortfall the valve opens and thus the output pressure is kept almost constant. By changing the spring tension, the spring setpoint can be continuously adjusted. The pressure regulator is available in four versions: - Version I brass housing with DIN DVGW and international drinking water approvals - Version II brass housing with inspectable strainer, DIN DVGW and international drinking water approvals - Version III stainless steel housing with DIN DVGW approval - Version IV plastic housing with union connection G1/8" and G1/4" Type TFU006 with plastic body and ported connection G 1/8 and G 1/4
1）Brass version with DVGW and international drinking water approvals
2）Stainless steel version with DVGW approval
3）Compact plastic version
4）Manometer port at pressure output
