FEATURES:
Impulse Noise Simulator INS-4020/4040 are more convenient and user-friendly than former models, thanks to the following features.
• Push button setting for all parameters
• Terminal block outlet panel
• Sweep operation for output voltage, phase angle and repetition cycle
• Up to 5 test settings stored in the momory
• Floating output
• Coupling mode selection by plugging the supplied coaxial connector to the selected port
• Easily changeable mercury relay
• Built-in 50 ohm terminator
• Easily changeable outlet panels
CE marked
SPECIFICATIONS:
Item | Model | INS-4020 (2kV) | INS-4040(4kV) | Output voltage | 0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step, Sweep mode available | 0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step, Sweep mode available | Polarity | Positive or negative | Square wave | Pulse width | 50ns, 100 ns, 200ns, 250ns, 400ns, and any combination thereof, maximum width, 1µs or 10ns±3ns (the shortest connection) | Pulse rise time | < 1ns | Output impedance | 50 ohm system (53.5 ohm) | Pulse repetition mode | Variable | 10ms ~ 999ms±10%, 1ms step Sweep operation available | 16ms ~ 999ms±10%, 1ms step Sweep operation available | Line phase | 50 or 60Hz, Injection phase angle 0~359°, 1° step Sweep operation available | External | >10ms, Pulse width>1ms TTL/Open collector negative logic | >16ms, Pulse width>1ms TTL/Open collector negative logic | Also functions for timing reference signals input from an external injection unit | 1 shot | Single pulse injection to the angle which is specified by Line phase setting on the power line, or Single shot without injection power line. | Memory | Up to 5 test settings | Power capacity of equipment under test | AC 240V, DC60V, Single phase, DC60V 16A | Power supply | AC100 ~ 240V 50/60H | Power consumption | 140VA | Operating temperature and humidity | 15~35°C / 25~75% (No dewing shall occur.) | Dimensions | (W) 430 X (H) 249 X (D) 420 mm(Projections excluded) | Weight | Approx. 19kgs | |
Included accessories
· Coaxial cable Model: 02-00013A (8 pcs)
o 30 cm length
· SG short plug Model: 02-00106A (1pc)
· Outlet panel Model: 18-00061B (1 pc)
o Terminal block type
o AC240V/16A DC60V/16A maximum
o Leaves the factory with this panel attached to the main unit (INS-4020 or INS-4040)
· AC cable (1pc)
o AC100-115V 3-p, 2.4m
Instruction manual (English / 1 pc)
The built-in injection circuitry has 16A rating for single-phase AC. For test exceeding this current limit or 3-phase application, IJ-4050 shall be used.
This optional unit can extend the EUT supply voltage and current ratings up to 3-phase AC 415V/50A. In conjunction with INS-4020/4040, this unit can operate in the EUT Line Synchronization mode.
SPECIFICATIONS
| Item | Model IJ-4050 | Impulse input | 8kV max when the INS-4020/4040 output is not terminated. | EUT power capacity | 3-phase, 5-wire (L1, L2, L3, N, PE) AC415V, 50A | Coupling mode selection | By short plug connection | Zero cross detection | Detects L1-L2 voltage and outputs synchronization signal from the SYNC OUT connector | Dimensions and weight | (W)430 x (H) 200 x (D) 535 mm (Projections excluded) Approx. 25.0 kgs | |
Model INS-RL2K for INS-4020 或INS-RL2K for INS-4040 :mercury relay unit for replacement
Model 18-00072A:circuit breaker box(斷路保護器)