詳情介紹：
UL817、UL62
插頭線靜態(tài)拉力試驗機試驗插頭與電線之間、插頭片與電線之間或線檔與電線之間在經(jīng)過一定時間負重后的耐負荷強度，同時可試驗 6 個試件。試法是將插頭片固定于試驗機上方，再將砝碼鉤在電源線上，設定好標準所要求的試驗時間后，按啟動按鈕后試驗機會慢慢降下托板使砝碼底面懸空吊著試件，拉力方向應與插片之插向成垂直，在標準要求的時間內(nèi)線材不能脫落或位移不能超過標準要求的距離。
This machine is suitable to test load strength between the conductors and blades。It can test six samples at the same time by a gradually applied pull of a certain load to the free end of the cord while the attachment plug is securely supported。The force shall be applied for a specified time in a direction perpendicular to the plane of cord entry。
This machine is suitable to test load strength between the conductors and blades。It can test six samples at the same time by a gradually applied pull of a certain load to the free end of the cord while the attachment plug is securely supported。The force shall be applied for a specified time in a direction perpendicular to the plane of cord entry。
| 荷重砝碼 Load | 8LB，15LB，20LB，30LB 各 3 個 |
| 計時器 Timer | 0 ~ 9999S 可任意設定 Adjustable |
| 電源 Power | AC220V / 50Hz |
