Series F01
Compact electric actuator for 90° operation, complete with the intelligent control unit ICON 2000 to fit small valves.
Compact electric actuator for 90° operation, complete with the intelligent control unit ICON 2000 to fit small valves.
Features & Benefits:
Mechanical features
- Light weight and compact design, mounting flange acc. ISO 5211
- Constant torque for complete operating stroke
- Torque control in both rotation directions
- Double spur gear reduction and planetary gear system for a high reduction ratio with inherent self-locking characteristics.
- All gearing with cut teeth, metal made, running in oil for high and constant efficiency and low power consumption
- All rotating parts supported by roller bearings and a permanent oil lubrication
- Manual operation always engaged but not rotating during automatic operations
- Mechanical adjustment of the position by mechanical stops connected directly to the actuator housing
- Anodized aluminium enclosures, protection by epoxy-polyurethane painting
Features ICON 2000
- Easy set-up and commissioning
- Initial tuning without unscrewing a single bolt or nut
- Reduced set-up time
- Double displays
- Position indication in case of power failure
- Local push buttons for full actuator access
- Password protection to avoid unauthorized access
- Diagnostics are displayed in one of the available languages for both alarms and warnings
- Reduced number of parts ensures higher reliability and lower maintenance cost
Specifications
Technical data | | |
Voltages | : | 110/220V-1Ph-50Hz |
| | 115/240V-1Ph-60Hz |
| | 230/400V-3Ph-50Hz |
| | 240/415V-3Ph-50Hz |
| | 440/480V-3Ph-60Hz |
Torques | : | up to 600 Nm |
Time/90° stroke | : | from 6 up to 60 sec. |
Temperature | : | -30°C to +85°C |
| | For other temperature ranges please contact Sales office |