 名稱：螺絲刀扭矩表 I-8 |
Feature
-Measure torque (rotating force) for motor screw driver and torque driver.
-It is suitable for daily torque maintenance with simple operations.
-The data output (serial communication) is possible.
Driver Torque Meter I-8/I-80 specification
| Model | I – 8 | I – 80 |
|---|---|---|
| Measuring range*1 | 0.20~78.60 cN-m | 0.020~7.860 N-m |
| 0.020~8.000 kgf-cm | 0.20~80.00 kgf-cm | |
| 0.020~6.970 lbf-in | 0.20~69.70 lbf-in | |
| - | 2.0~786.0 cN-m | |
| Accuracy | +/- 0.5% (reading value) or +/-3digit in less than 499 digit. | |
| Display | 4 digits LCD display | |
| Measuring direction | CW-CCW (Right turn /Left turn) | |
| Measuring mode | P-P(Peak-hold), T-R(Track), P-D(Peak-down),C(real time data output) | |
| Upper/Lower value setting | Upper/ Lower value are able to be set in the measuring range. | |
| Pass-fail decision | Pass/Fail can be check in the measuring range.(P-P mode) | |
| GOOD (Pass)…Green lights, NG( Fail)…Red blinks | ||
| Max./ Min./Ave. display | Display stored Max. / Min. /Ave. / Number of measuring values. | |
| Real time data output | Output applied torque approx. 1/180 sec each. | |
| Internal memory | 800 data | |
| Output data | ASCII (baud rate 19200 bps) | |
| Auto zero reset function | Automatic clear value function in each 0.1~3.0 sec (The setting is possible from 0.5 sec each). Manual zero reset setting is at 0.0 sec. | |
| Zero Reset function | Auto or Manual (only pressing the button.) | |
| Battery | Ni-Cd 1.2v×5 cell(700mAh) 300 times | |
| Auto power-off | Auto power-off in 10 minutes with no operation. | |
| Charging time/ Usable time | Approx.3 hours/ Approx. 12 hours continuous use after full charge. | |
| Socket joint part (Detecting parts shape) | Square 20 mm / Square 9.5 mm | |
| Included items (1 each) | Driver adapter OW-025/OW-10 | Driver adapter OW-20/OW-60 |
| Attaché case, battery charger, inspection certificate (*2), calibration certification (*2), traceability system diagram(*2). | ||
*This product is NOT suitable for impact tools.
*1 It is only approved for the international model. The Japanese model is different range.
*2 All documents are written in English.
Adapter specification
| OW-025 | OW-10 | OW-20 | OW-60 | |
|---|---|---|---|---|
| Range | Max. 0.25N-m | Max. 1.0N-m | Max. 2.0N-m | Max. 6.0N-m |
| Mechanical life | 10,000 times | 8,000 times | 5,000 times | 5,000 times |
| Bit joint part | M2.6+Pan head screw | M3.0+Pan head screw | M4.0+Pan head screw | M6.0+Panhead screw |
| Body dimension | φ28×44 | φ32×51 | φ32×51 | φ32×69 |
*In the bit joint part, the user inserts their using screw.
*The adapters cannot be used for a manual torque driver. The optional driver adapter is required.
Please contact us if you need.
