A 1110-05-E
4-quadrant voltage and current amplifier
DC-1 MHz | 100 V/μs | 500 W (source) | 150 W (sink)
Fully configurable and operable by means of the supplied software
Symmetrical input
Series / parallel connection in case of higher voltage / current requirements
USB port as series (LAN interface optional)
3 supply voltages
Monitor output voltage / current
6 configurable compensation networks for inductive loads
in the current amplifier operating mode
Output Voltage vs. Frequency Red: @ 8 Ohm Blue: @ 4 Ohm Green: @ 2 Ohm | U-I Plot, Supply Voltage: Low Blue: AC Limit Red: DC Limit |
Electrical data
Output voltage | ± 75 Vpeak |
Output current | ± 11 Apeak |
Performance range | DC – 200 kHz |
Frequency response | DC - 1 MHz (Small signal -3 dB) |
Slew rate | 100 V/μs |
Voltage amplification | 10 ± 0.1 % (± 0.01 % /°C) |
Offset | ± 1 mV (± 0.1 mV /°C) |
A 1110-05-E
4-quadrant voltage and current amplifier
DC-1 MHz | 100 V/μs | 500 W (source) | 150 W (sink)
Fully configurable and operable by means of the supplied software
Symmetrical input
Series / parallel connection in case of higher voltage / current requirements
USB port as series (LAN interface optional)
3 supply voltages
Monitor output voltage / current
6 configurable compensation networks for inductive loads
in the current amplifier operating mode