主要特性與技術指標
4 插槽主機最多可安裝 4 個模塊，總功率高達 600 W。有 30 多款直流電源模塊可供選擇（需單獨訂購模塊）
電壓表精度：高達 0.025% + 50 µV，高達 18 位
安培計精度：高達 0.025% + 8 nA，高達 18 位
任意波形發生器功能：帶寬高達 100 kHz，輸出功率高達 500 W
示波器功能：可對電壓和電流進行數字化處理，200 kHz，512 kpts，高達 18 位
數據記錄儀功能：測量間隔從 20 µs 到 60 s，每個數據記錄最多存儲 5 億個讀數
4 GB 非易失性數據存儲器，用于存儲數據記錄、示波器跡線、儀器設置
描述
N6705C 為您節省時間
N6705C 直流電源分析儀將多達 4 個*電源與數字萬用表、示波器、任意波形發生器和數據記錄儀功能融為一體，可以顯著提高為被測器件提供和測量直流電壓和電流的效率。N6705C 可獨立測量被測器件的輸入電流，無需使用多個設備構建包括傳感器（例如電流探頭和分路器）在內的復雜測量裝置。它也無需開發和調試程序，即可控制儀器組合并進行有效的測量，因為前面板已經提供了所有功能和測量。它還可與 14585A 控制和分析軟件一起使用，獲得更強大的控制和分析功能。若需要自動進行工作臺設置，N6705C 可通過 GPIB、USB、LAN 進行*編程，并且符合 LXI 類標準。
Main features and technical indicators
Up to 4 modules can be installed in the 4-slot host, with total power up to 600w. More than 30 types of dc power supply modules are available for selection (modules need to be ordered separately)
Voltmeter accuracy: up to 0.025% + 50 V, up to 18 bits
Ammeter accuracy: up to 0.025% + 8 nA, up to 18 bits
Function of arbitrary waveform generator: bandwidth up to 100 kHz, output power up to 500 W
Oscilloscope function: digital processing of voltage and current, 200 kHz, 512 KPTS, up to 18 bits
Data recorder function: measuring interval from 20 s to 60 s, each data record up to 500 million readings
4 GB non-volatile data storage for storing data records, oscilloscope traces, and instrument Settings
describe
The N6705C saves you time
The N6705C dc power analyzer integrates up to 4 advanced power sources with digital multimeters, oscilloscopes, arbitrary waveform generators and data loggers to significantly improve the efficiency of providing and measuring dc voltage and current for devices under test. The N6705C can independently measure the input current of the device under test, without the need to build complex measuring devices including sensors (such as current probes and shunt) using multiple devices. It also allows you to control the instrument assembly and make effective measurements without having to develop and debug programs, because the front panel already provides all the functions and measurements. It can also be used with 14585A control and analysis software for more powerful control and analysis functions. If the workbench setting is required automatically, the N6705C can be fully programmed
