加工定制 : | 是 | 品牌 : | 弗洛拉科技 |
型號 : | FLR-NP01 | 測量范圍 : | 4000kpa |
材質 : | 不銹鋼 | 電源 : | 220V |
尺寸 : | 440×420×560 | 重量 : | 60 |
產品詳情
Product details
貴州紙箱爆破試驗機_化妝品紙盒爆破強度試驗機_紙箱破裂度試驗機
貴州紙箱爆破試驗機_化妝品紙盒爆破強度試驗機_紙箱破裂度試驗機儀器概述:
全自動紙板耐破度測試儀是測試紙箱紙板的破裂強度值,采用LCD晶屏數字顯示,在試料破裂時,自動保留破裂強度值,同時可趨勢打印檢測結果。破裂強度試驗機的指示方式為數位式,容量為0-60kg/cm2。廣泛的適用于包裝材料,包括一般紙箱、紙張、瓦楞紙、衛生紙、包裝、 紙等等, 及皮革、布類、包裝薄膜之上, 可有效的對產品質量進行監測。
貴州紙箱爆破試驗機_化妝品紙盒爆破強度試驗機_紙箱破裂度試驗機 特點:只要放進材料,即自動偵測,自動試驗,自動油壓回位及自動計算、儲存測試數據、打印,儀器用數字顯示并能自動打印測試結果和數據處理
貴州紙箱爆破試驗機_化妝品紙盒爆破強度試驗機_紙箱破裂度試驗機產品介紹:
自動夾緊和松開裝置,試樣夾持力:>690kPa(可調節)
測試系統密封性:1min內壓降<10%Pmax
分 辨 率:0.1kPa;
排 氣 量:(0.02~0.3)m3/min
額定壓力:( 0.6~0.7)
測試單位:Pa、kPa、kgf
重 量: 約50kg
液壓油 :甘醇油
夾環材質:不銹鋼 SUS 304#
夾環口徑:上環 :Φ 31.50mm
下環 :Φ 31.50mm
體 積:44×42×56cm
電 源:AC220V±10% , 50Hz 120W
耐破度測量范圍: 250~5600kpa
氣 壓 源:min.6kg/cm2 (客戶自備) 加壓速度:170±15ml/min
標準配送:扳手一個,專用甘醇油1瓶,校正片10片,橡皮膜2片,專用錘子一把
打印測試值
操作說明:點擊一個按鍵測試即可完成,自動取值
1. Application
This series of products use digital display pressure to test material broken down, automatically retain maximum rupture strength value, indicating approach to digital display pressure, capacity is0~100kgf/cm^2.They can be widely applicable to packaging materials, including the general paper, corrugated paper, toilet paper, wrapping paper, etc. Used in leather, cloth, packaging film etc, can effective for product quality monitoring.
2.Design criteria:
JIS-L1004,L1018,L1031,K6328,P8131,P8112,ASTM-D2210,TAPPI T403,ISO2759-2001,GB/T1539 |
3. Technical Parameters
Capacity (Optional) | High Pressure 0~100 Kg/ cm^2 (0.1kg/cm^2) |
Unit (switchable) | Kpa, psi, kg/cm^2 |
Pressure Range | 250~5600kpa |
Accuracy | ± 0.5% |
Speed of Compression | High Pressure 170± 10ml/min |
Oil | 85% Glycerin; 15% Distilled Water |
Specimen Clamping Force | >690kpa |
Sensing method | Pressure Transmitter |
Indicating Method | Digital |
Display | LCD |
Material of the Ring | Stainless Steel SUS304 |
Opening in Upper Clamp | 31.5 ± 0.05 mm Diameter |
Opening in Lower Clamp | 31.5 ± 0.05 mm Diameter |
Operation Method | Automatic |
Motor | Anti-vibration Motor 1/8 HP |
Dimension (L×W×H) | 445×425×525 mm |
Weight | Approx. 70 kg |
Power | 1?, AC220± 10%, 50 Hz |
Power Capacity | 120W |
Standard Configuration | Rubber Membrane 5 piece, Spanner 1 set, Correction Shim 10 sheets, Glycerin 1 bottle |
Optional Configuration | Printer |
Standard | JIS-L1004, L1018, L1031, K6328, P8131, P8112 |
更多詳情請,歡迎訂購。如買家需要,請先來電,咨詢是否有現貨。