DH-1110加硫成型試驗機MOLDING TEST PRESS
DH-1110加硫成型試驗機產品說明:
原料放于壽模DH-1110加硫成型試驗機內,夾于DH-1110加硫成型試驗機電熱平板間,加以壓力及溫度,使原料成型,以供試驗,做為工廠大量和產配料之依據。
This machine is very convenient for preparing test specimens /put raw materials into iron die and clamp die between the electric heating plates of the machine ,then heat random press the die to mold the raw materials into specimens for testing in laboratory and being the standard in mass production.
參數規格:
型式Model | DH-1110-A電動油壓式hydraulic | DH-1110手動油壓式manual | |
容量選擇Capacity | 10,30,50ton(optional) | ||
溫度Temp | 常溫room temp .~300℃ | ||
計時器Timer | LED ,0~99min | ||
電熱板面積Heat Plate Area | 30×30cm | 40×59×144cm | |
電熱板間距Heat Plate Space | 0~75mm | ||
冷卻方式Cooling method | 水冷式water (選擇optional) | ||
體積Dimension(W×D×H) | 100×70×150cm | 40×59×144cm | |
重量Weigh | 795kg | 213kg | |
電源Power | 1∮,AC 380V,20A | 1∮,AC 220V,12A |