傳奇的MHR系列LVDTs在空間限制應用中提供精確測量。MHR系列直徑僅為3/8英寸(9.5mm)，芯極輕，是理想的f。 或者，當過高的堆芯重量會影響被測物體的運動時，用較小的慣性，在較高的位移速度下進行精確的測量就更容易實現了。輕量級c 礦石還減少機械應力，并有助于保持核心驅動組件的結構完整性。
線圈與鐵芯之間的緊密電耦合所產生的高輸出靈敏度為與幾乎所有的信號調理器和調理CIRC接口提供了充足的信號。 尤伊茨。磁性不銹鋼外殼提供電磁和靜電屏蔽。
高溫操作(200 OC)適用于中風范圍±0.025~±1英寸(會診廠)。高壓(排氣箱)版本也提供(咨詢工廠)。MH R與測量專業的全線LVDT信號調理器兼容。
和我們的大多數lvdts一樣，mhr繞組是用一種特殊配方的高溫柔性樹脂進行真空浸漬的，線圈組件在其外殼內裝有兩個組件。 環氧樹脂。這提供了良好的保護，以抵御惡劣環境，如高濕度，振動和沖擊。
技術參數
PERFORMANCE SPECIFICATIONS
ELECTRICAL SPECIFICATIONS (common) | |
Input voltage | 3 VRMS sine wave |
Input frequency | 2kHz to 20kHz |
Test frequency | 2.5kHz (standard) |
ELECTRICAL SPECIFICATIONS @ 10kHz (recommended operation) | |||||||||
Parameter | MHR 005 | MHR 010 | MHR 025 | MHR 050 | MHR 100 | MHR 250 | MHR 500 | MHR 1000 | MHR 2000 |
Stroke range | ±0.005 [±0.13] | ±0.010 [±0.25] | ±0.025 [±0.64] | ±0.05 [±1.27] | ±0.10 [±2.54] | ±0.25 [±6.35] | ±0.5 [±12.7] | ±1 [±25.4] | ±2 [±50.8] |
Sensitivity V/V/inch [mV/V/mm] | 8.70 [343] | 6.05 [238] | 8.10 [319] | 3.15 [124] | 2.80 [110] | 2.07 [81.5] | 1.96 [77.2] | 0.77 [30.3] | 0.49 [19.3] |
Output at stroke ends mV/V (*) | 43.5 | 60.5 | 202.5 | 157.5 | 280 | 517.5 | 980 | 770 | 980 |
Phase shift | +38° | +20° | +21° | +8° | +5° | +7° | +7° | -1° | -15° |
Input impedance (PRIMARY) | 84Ω | 165Ω | 238Ω | 419Ω | 400Ω | 345Ω | 264Ω | 155Ω | 504Ω |
Output impedance (SECONDARY) | 302Ω | 300Ω | 485Ω | 154Ω | 200Ω | 420Ω | 810Ω | 450Ω | 1780Ω |
Non-linearity | ±% of FR | ||||||||
@ 50% stroke | 0.20 | 0.10 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.20 | / |
@99% stroke (max) | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.50 |
@125% stroke | 0.30 | 0.35 | 0.25 | 0.35 | 0.25 | 0.35 | 0 .30 (**) | 0 .50 | / |
@150% stroke | 0.40 | 0.35 | 0.30 | 0.50 | 0.30 | 0.50 (**) | 0.75 (**) | / | / |
Null voltage (max.) | 2.5% FRO | 1.0% FRO | 0.5% of FRO | ||||||
(*) Unit for output at stroke ends is millivolt per volt of input voltage; (**) Requires special reduced core length
ELECTRICAL SPECIFICATIONS @ 2.5kHz (standard calibration) | |||||||||
Parameter | MHR 005 | MHR 010 | MHR 025 | MHR 050 | MHR 100 | MHR 250 | MHR 500 | MHR 1000 | MHR 2000 |
Stroke range | ±0.005 [±0.13] | ±0.010 [±0.25] | ±0.025 [±0.64] | ±0.05 [±1.27] | ±0.10 [±2.54] | ±0.25 [±6.35] | ±0.5 [±12.7] | ±1 [±25.4] | ±2 [±50.8] |
Sensitivity V/V/in [mV/V/mm] | 3.19 [126] | 3.36 [132] | 4.36 [172] | 2.55 [100] | 2.40 [94] | 1.73 [68] | 1.60 [63] | 0.70 [27] | 0.47 [19] |
Output at stroke ends, mV/V (*) | 16 | 33.6 | 109 | 127.5 | 240 | 432.5 | 800 | 700 | 940 |
Phase shift | +73° | +59° | +58° | +36° | +30° | +33° | +23° | +6° | +3° |
Input impedance (PRIMARY) | 59Ω | 78Ω | 116Ω | 141Ω | 135Ω | 147Ω | 145Ω | 100Ω | 304Ω |
Output impedance (SECONDARY) | 260Ω | 192Ω | 286Ω | 90Ω | 125Ω | 268Ω | 445Ω | 370Ω | 13620Ω |
Non-linearity | ±% of FR | ||||||||
@ 50% stroke | 0.20 | 0.10 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.20 | / |
@99% stroke (max) | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 |
@125% stroke | 0.30 | 0.35 | 0.25 | 0.35 | 0.25 | 0.35 | 0.30 (**) | 0 .50 | / |
@150% stroke | 0.40 | 0.35 | 0.30 | 0.50 | 0.30 | 0.50 (**) | 0.75 (**) | / | / |
Null voltage (max) | 3% FRO | 1.5% FRO | 0.5% of FRO | ||||||
(*) Unit for output at stroke ends is millivolt per volt of input voltage; (**) Requires special reduced core length
ENVIRONMENTAL SPECIFICATIONS & MATERIALS | |
Operating temperature | -65°F to +300°F [-55°C to 150°C] |
Shock survival | 1,000 g (11ms half-sine) |
Vibration tolerance | 20 g up to 2KHz |
Housing material | AISI 400 Series stainless steel |
Electrical connection | Six lead-wires, 32 AWG stranded Copper, PTFE insulated, 1 foot [0.3m] long (longer wires optional) |
IEC 60529 rating | IP61 |
Notes:
All values are nominal unless otherwise noted
Electrical specifications are for the test frequency indicated in the table Dimensions are in inch [mm] unless otherwise noted
FR: Full Range is the stroke range, end to end; FR=2xS for ±S stroke range
FRO (Full Range Output): Algebraic difference in outputs measured at the ends of the range
MECHANICAL SPECIFICATIONS
Parameter | MHR 005 | MHR 010 | MHR 025 | MHR 050 | MHR 100 | MHR 250 | MHR 500 | MHR 1000 | MHR 2000 |
Body length “A” | 0.375 [9.5] | 0.535 [13.6] | 0.660 [16.8] | 0.815 [20.7] | 0.990 [25.1] | 1.850 [47.0] | 3.300 [83.82] | 5.600 [142.2] | 8.000 [203.2] |
Core length “B” | 0.180 [4.6] | 0.233 [5.9] | 0.400 [10.2] | 0.500 [12.7] | 0.625 [15.9] | 1.125 [28.6] | 2.000 [50.8] | 3.000 [76.2] | 3.00 [76.2] |
Body weight oz [g] | 0.07 [2] | 0.11 [3] | 0.18 [5] | 0.21 [6] | 0.21 [6] | 0.32 [9] | 0.60 [17] | 0.92 [26] | 1.4 [40] |
Core weight oz [g] | 0.004 [0.1] | 0.007 [0.2] | 0.016 [0.5] | 0.016 [0.5] | 0.025 [0.7] | 0.032 [0.9] | 0.056 [1.6] | 0.088 [2.5] | 0.088 [2.5] |
北京優利威科技有限科技公司專業從事各種傳感器服務
如有需求或咨詢請電話：
或關注優利威微信公眾號：傳感應用
