PHASCOPE PMP10 DUPLEX鍍鋅層測厚儀
The PHASCOPE® PMP10 DUPLEX has been developed for the precise measurement of the individual layer thicknesses of duplex coatings (lacquer/zinc coating system on steel or iron).
Due to the novel phase-sensitive eddy current method, it is capable of measuring very precisely zinc coatings with thicknesses between 0 µm and about 100 µm.
In this manner, it is far superior to conventional eddy current coating thickness measuring instruments that are to reduce the influence of a fluctuating zinc coating on the measurement of the lacquer thickness by a special “phase adjustment” or an increased measurement frequency.
In particular thin zinc coatings in a range of 0 – 10 µm on auto bodies can be measured very reproducibly.
Typical applications are in the quality assurance of
Auto body painting
Shopping carts and similar
Brake line tubes and many others
Zinc alloy coatings such as ZnNi or ZnFe cannot be measured due to their low electr. conductivity.
The same applies to hot-dip galvanized coatings due to diffusion coatings that are typically present and have different electr. conductivities compared to pure zinc coatings.
涂裝 相關(guān)儀器：涂層測厚儀，漆膜硬度測試儀，電解膜厚儀，黏度計/粘度計，X射線測厚儀，附著力測試儀，微型光澤儀，分光色差儀，霧影儀，反射率測定儀，光譜儀，涂膜干燥時間記錄儀，標準光源箱
