一、產品簡介：
漆膜磨耗儀適用于GB/T15036.2、GB/T15102、GB/T18102、GB/T4893.8、ISO7784.2標準。對漆膜耐膜性能的測試和對木材飾面耐磨性能的測試必須采用同配置的轉盤組件和磨耗輪，請在定貨時予以說明（可選擇“漆膜配置”、“木材配置”或“兩用配置”）。轉盤轉速可在50-100r.P.m范圍內按用戶要求特殊設置（需訂貨時說明）
Product introduction:
Paint film abrasion tester is applicable to GB / T15036.2, GB / T15102, GB / T18102, GB / T4893.8, ISO7784.2 standards. The test of the film film resistance and the test of the wood surface abrasion resistance must use the same configuration of the turntable assembly and the wear wheel, please specify when ordering (select "film film configuration", "wood configuration" or " Dual-use configuration "). The rotating speed of the turntable can be set according to user requirements within the range of 50-100r.P.m (specify when ordering)
二、產品特點：
的磨耗工序 將待測材料放在轉盤上，兩個磨耗輪以一定壓力壓在材料上使其受磨耗。 磨耗輪隨樣件盤轉動面轉動，產生相對運動和磨耗，而轉動 (60 RPM 或 72 RPM) 過程中磨耗輪軸相對于轉盤轉軸的偏移產生滑移運動，從而磨耗材料。 面積為30平方厘米的樣件承受磨耗時，樣件表面材料受全角度顆?；蚪z織狀物磨損形成一完整的圓環。磨耗機是當前功能好的加速磨損試驗儀。通過改變附件可以改變試驗功能。這款耐用型儀器可以在一種物料同一點上進行重復測試，至厚約0.5"的材料破損或被磨掉。 選擇同的磨耗輪和附件可以模擬同的真實磨耗情況進行同的試驗。
嚴格的控制保證可靠的結果 精心挑選的磨耗輪磨料，質量高 加在磨擦輪上的壓力以克為單位 磨耗輪穩定性經嚴格的質量控制 電子測量轉盤轉動數 真空吸塵器除磨屑。
Product Features:
Unique abrasion process Put the material to be tested on the turntable, and two abrasion wheels press the material with a certain pressure to wear it. The abrasion wheel rotates with the rotating surface of the sample disc to generate relative motion and wear. During the rotation (60 RPM or 72 RPM), the offset of the abrasion wheel shaft with respect to the rotation axis of the turntable generates a slip motion, thereby abrading the material. When the sample with an area of 30 cm2 is subjected to abrasion, the surface material of the sample is worn by full-angle particles or silk to form a complete ring. The abrasion machine is a current good accelerated wear tester. The test function can be changed by changing the attachment. This rugged instrument can be repeatedly tested at the same point of a material, and materials up to about 0.5 "thick are damaged or worn away. The same wear wheel and accessories can be used to simulate the same real wear conditions and perform the same tests.
Strict control guarantees reliable results. Carefully selected abrasive wheel abrasives, high quality. Pressure on the friction wheel is measured in grams. Stability of the abrasive wheel is strictly controlled. Electronic measurement of the number of turntables. Vacuum cleaner to remove abrasive debris.
三、技術參數：
? 主電動機功率：40W
? 修磨電動機：JX5612 220V 90W 2800r/min
? 轉盤轉速：0~90r/min
? 橡膠砂輪：50*16*13
? 荷重砝碼：250克 500克 750克
? 荷重砝碼標示重量：500克 750克 1000克
砝碼標示重量為施加壓于試件表面的重力
荷重砝碼上標示的重量=砝碼實際重量+加壓套重量250克（固定在儀器上）
例：荷重砝碼上標示的重量為500克=砝碼實際重量250克+加壓套250克
? 砂輪平衡砝碼：1克 2克 5克 10克 20克 （銷軸20克）
? 外形尺寸：主機：220*280*300（長*寬*高）
修磨機：300*205*175（長*寬*高）
? 重量：15Kg
Third, the technical parameters:
? Main motor power: 40W
? Grinding motor: JX5612 220V 90W 2800r / min
? Turntable speed: 0 ~ 90r / min
? Rubber grinding wheel: 50 * 16 * 13
? Load weight: 250g, 500g, 750g
? The indicated weight of the load weight: 500g, 750g, 1000g
The weight indicates the weight applied to the surface of the test piece.
The weight marked on the load weight = the actual weight of the weight + the weight of the compression sleeve 250 grams (fixed on the instrument)
Example: The weight indicated on the load weight is 500 grams = the actual weight of the weight is 250 grams + the compression sleeve is 250 grams
? Wheel balance weight: 1g 2g 5g 10g 20g (pin 20g)
? Dimensions: Host: 220 * 280 * 300 (length * width * height)
Grinding machine: 300 * 205 * 175 (length * width * height)
? Weight: 15Kg
四、工作原理：
嚴格的控制保證可靠的結果 精心挑選的磨耗輪磨料，質量高 加在磨擦輪上的壓力以克為單位 磨耗輪穩定性經嚴格的質量控制 電子測量轉盤轉動數 真空吸塵器除磨屑。
漆膜磨耗儀是由二個磨耗砂輪配置于轉盤上，當轉盤旋轉時，左側一個磨耗砂輪由外向樣板表面 磨擦，而右側一個磨耗砂輪由樣板表面 向外磨擦。當轉盤旋轉一周時，在樣板表面磨耗的痕跡是由互相重合，并呈X形相交的二園環組成。采用這種方式，其優點是使樣板表面各個方向都受到磨擦，克服了一個方向往復運動的耐磨儀的缺點。
Fourth, the working principle:
Strict control guarantees reliable results. Carefully selected abrasive wheel abrasives, high quality. Pressure on the friction wheel is measured in grams. Stability of the abrasive wheel is strictly controlled. Electronic measurement of the number of turntables. Vacuum cleaner to remove abrasive debris.
The paint film abrasion meter is configured by two abrasion wheels on the turntable. When the turntable rotates, the left abrasion wheel is rubbed outward from the surface of the template, and the right abrasion wheel is rubbed outward by the surface of the template. When the turntable is rotated once, the wear marks on the surface of the template are composed of two circular rings that overlap each other and intersect in an X shape. In this way, the advantage is that the surface of the template is rubbed in all directions, which overcomes the shortcomings of the abrasion tester that reciprocates in one direction.
五、注意事項：
⑴ 測試結束后，應切斷電源，清理儀器，將儀器罩好。
⑵ 長期用時，應將砂輪取下放好。
⑶ 一年至二年必須檢修加油一次
Five; matters needing attention:
After the test, the power should be cut off, the instrument should be cleaned, and the instrument should be covered.
時 For long-term use, the grinding wheel should be removed and placed.
⑶ Must be overhauled once a year to two years
