砂漿分層度測定儀是我公司依照J(rèn)GJ70-2009建筑砂漿基本性能試驗方法設計制造，主要用于測得砂漿在運轉及停放時的保水能力即稠度的穩定性。
The mortar delamination measuring instrument is designed and manufactured by our company in accordance with the basic performance test method of JGJ70-2009 building mortar. It is mainly used to measure the water retention capacity and consistency of the mortar when it is running and parked.
砂漿分層度測定儀參數：
■內徑：150mm
■上節高：200mm
■下節高：100mm
■外形尺寸：250X250X400mm
■ 重量：15kg
Mortar Delamination Tester Parameters:
■ Inner diameter: 150mm
■ Upper section height: 200mm
■ Lower section height: 100mm
■ Dimensions: 250X250X400mm
■ Weight: 15kg
砂漿分層度測定儀試驗步驟：
將拌和好的砂漿 行稠度試驗，然后將同批砂漿（或經稠度試驗的砂漿重新拌和均勻）一次注滿分層度筒。
靜置30分鐘后，再取容器下部1/3部分的砂漿 即：去掉上層20厘米砂漿，然后取出底層10厘米砂漿重新拌勻再測定砂漿稠度。
兩次砂漿稠度的差值，即為砂漿的分層度（厘米）。
砂漿的分層度應取兩次試驗結果的算術平均值。
Test steps of mortar layer tester:
The mixed mortar is subjected to a consistency test, and then the same batch of mortar (or the mortar that has undergone the consistency test is re-mixed evenly) once into the full-scale layer cylinder.
After standing for 30 minutes, take the mortar in the lower third of the container, that is, remove the upper 20 cm mortar, then take out the bottom 10 cm mortar and mix again to determine the mortar consistency.
The difference between the two consistency of the mortar is the delamination (cm) of the mortar.
The delamination of the mortar shall be the arithmetic mean of the two test results.
砂漿分層度測定儀維護保養：
儀器設備不準隨意拆改或解體使用，確因需要開發新功能或改造更新等，需按分 管理權限，履行審批手續后再實施。
經常進行 設備的保養與維護，并存放在干燥通風之處，待用時間過長儀器設備，應定期通電開機，防止潮霉損壞儀器設備其零部件。
建立大型精度、貴重 備技術指標定期校驗和標定制度，保持應有的技術指標。做好使用原始記錄。
Maintenance of Mortar Delamination Tester:
Instruments and equipment are not allowed to be dismantled or dismantled at will. Due to the need to develop new functions or upgrades, etc it is necessary to manage the authority according to the sub- and implement the approval procedures.
Carry out maintenance and maintenance of the equipment frequently, and store it in a dry and ventilated place. If the equipment is not used for a long time, it should be powered on regularly to prevent moisture and mold from damaging its components.
Establish regular calibration and standardization of large-scale precision and precious technical indicators, and maintain due technical indicators. Make good use of original records.
砂漿分層度測定儀結構：
其內徑為15厘米，上節高20厘米，下節高10厘米，帶底，用金屬板制成，上下節用螺栓連接。
Mortar Delamination Tester Structure:
Its inner diameter is 15 cm, the upper section is 20 cm high, and the lower section is 10 cm high. It has a bottom and is made of metal plate. The upper and lower sections are bolted.
