PDW180石油產品低溫測定儀
本儀器是按照中華人民共和國標準GB/T3535《石油傾點測定法》和GB/T698《石油濁點測定法》規定的要求設計制造的，適用于石油傾點及濁點等指標的測定。
一、主要技術特點
1、工作臺面由不銹鋼組成，共有冷槽Ⅰ、冷槽Ⅱ兩個冷槽（可選四槽八孔），各槽又各有兩個冷浴，每個冷槽的兩個冷浴等溫，都可做傾點、濁點的測試。
2、采用*的專門技術，冷槽無須使用冷卻液，制冷速度快，效率高。控溫儀Ⅰ和控溫儀Ⅱ分別控制冷槽Ⅰ和冷槽Ⅱ的溫度，其中冷槽Ⅱ的低溫度可達到-70℃，控溫精度可達到±1℃。
3、儀器為臺式結構，設計簡潔，使用方便，配套齊全，購回儀器即可做傾點及濁點試驗。
二、主要技術參數及指標
1、工作電源： AC 220V±10%；50Hz。
2、冷槽控溫： ⑴ 冷槽Ⅰ：室溫～-51℃，±1℃，兩浴等溫；
⑵ 冷槽Ⅱ：室溫～-70℃，±1℃，兩浴等溫。
3、制冷系統： 新型致冷壓縮機。
4、環境溫度： ≤30℃ 。
5、相對濕度： ≤85%。
6、功耗： 不大于1500W。
Oil analysis instruments pour point, cloud point analyzer
The instrument is designed and manufactured in accordance with the Peoples Republic of China Standard GB/T3535 "oil pour point assay and GB/T698 oil Determination of cloud point" under the requirements applicable to the determination of the oil pour point and cloud point index.
, The main technical characteristics
1, the working table consists of stainless steel, a total cold tank Ⅰ the cold grooves II two cold tank, each of the grooves and each of the two cooling bath, the two grooves of each cold cooling bath temperature, can be done pour point, cloud point, testing.
2, using the unique expertise the cold tank without the use of the coolant, the cooling speed, high efficiency. The temperature control device I and the temperature control device II, respectively, to control the temperature of the the cold tank I cold trough II the cold trough II, the lowest temperature can reach -70 ° C, the temperature control accuracy of ± 1 ° C.
3 instruments for desktop structure, the design is simple, easy to use, fully furnished repurchase the instrument to do the pour point and cloud point test.
Second, the main technical parameters and indicators
1 Power supply: AC 220V ± 10%; 50Hz.
2, the cold tank temperature control: ⑴ cold trough I: room temperature ~ -51 ℃ ± 1 ° C, two-bath isothermal;
⑵ cold trough II: room temperature ~~ -70 ° C ± 1 ° C, two-bath isothermal.
Refrigeration system: a new refrigeration compressor.
Ambient temperature: ≤ 30 ℃.
5, relative humidity: ≤ 85%.
6, power consumption: not more than 1500W.
