韓國KODO NXG-SA超聲波發生器特點和參數:
•Output Control - Output level can be controlled from 10 to 99%.
•SWEEP Function - Built in Sweep function has a great affect in deaeration and decreasing stain spots (Dead Zone).
•Remote Function - Remote control function using exterior point of contract.
•FND Function - One can easily identify frequency, power, time, and temperature through FND.
•Other Functions - Alarm Function, 4~20mA communication function.
*輸出控制-輸出電平可控制在10%~99%之間。
·*SWEEP功能-對除氣和減少污點(死區)有良好的效果。
·遠程功能-使用外部契約點的遙控功能。
·fnd功能-通過fnd可以方便地識別頻率、功率、時間和溫度。
·其他功能-報警功能、4~20 ma通信功能。
超聲波發生器型號 | NXG-SA600 / SA900 / SA1200 / SA1500 / SA1800 |
超聲波頻率 | 28Khz / 40Khz |
超聲波輸出功率 | 600W / 900W / 1200W / 1500W / 1800W |
超聲波換能器 | B.L.T Transducer |
SWEEP 功能 | O |
控制方法 | Analog Type模擬量 |
尺寸(mm) | 300x400x120 |
電源 | AC220V/60Hz |
重量 | 約12Kg |
韓國KODO NXG-HD高頻超聲波發生器特點和參數:
•Generator for High-frequency - NXG-HD series is designed for high-frequency from 68Khz to
168Khz.
•Easy of Use - Users can easily control the operation using control panel.
•Self Diagnosis Function - Users can easily figure out the cause of malfunction due to self
diagnosis function.
•DATA Check - One can easily check operation frequency, power, and internal
temperature level without separate measuring instrument.
•RS-485 Communication - Though the RS-485 communication, users can monitor and control
operation on PLC.
•Alarm Function - It alerts the users if there is any problem.
高頻超聲波發生器型號 | NXG-HD-68K/75K/100K/132K/168K |
超聲波頻率 | 68Khz/75Khz/100Khz/132Khz/168Khz |
超聲波輸出功率 | 600W / 900W / 1200W |
超聲波換能器 | B.L.T Transducer |
振動方法 | PLL |
尺寸(mm) | 310x440x130 |
輸入電壓 | AC220V/60Hz |
輸入電流 | 6A(at 1200W of output) |
重量 | 約12Kg |
韓國KODO NXG-HSS高速切換三頻率發生器特點和參數:
High-speed switching 3-Frequency Generator NXG-HSS
1) By switching the position of the standing wave for three different frequencies at a high speed, it
provides a cleaning power of each frequency at the same time.
2) Because the positions of the standing wave of each frequeny is different.
A.To prevent stains caused by standing waves.
B.It provides precise cleaning, and can also reduce damage to the cleaning tank.
3) The burst wave generated by high-speed switching method creates a number of high-order vibration
to the cleaning of the glass capillary tube and precision parts.
4) Ultrasound of 100Khz is a degassing effect, it is possible to prevent the attenuation of ultrasonic
cleaning power to keep up to near the top of the wash tank.
5) The pumping effect caused by high speed switching(mSec) is effecting washed complex fine holes.
6) The life time of Tank and Transducers increases.
超聲波發生器型號 | NXG-HSS |
超聲波發生器方法 | Oscillation Mode Choice F1-F2, F1-F3, F2-F3 2 frequency Switching / F1-F2-F3 3 frequency Switching |
切換周期 | 1~10ms Selectable |
超聲波頻率 | 28K/45K/100Khz |
超聲波輸出功率 | 600W / 600W / 300W |
超聲波換能器 | B.L.T Transducer for Multi Transducer |
輸入功率 | Single AC200V ~ AC220V / 60Hz, 4A Max |
顯示 | Character LCD(2 * 20) & LED |
輸出功率 | 50% ~ |
計時器 | 1sec ~ 99min 59sec |
環境 | Temperature:0~40℃, Humidity 0~80% |
尺寸(mm) | 310x440x130 |
重量 | 約12Kg |
韓國KODO NXG-MD低輸出超聲波發生器特點和參數:
High-speed switching 3-Frequency Generator NXG-HSS
1) By switching the position of the standing wave for three different frequencies at a high speed, it
provides a cleaning power of each frequency at the same time.
2) Because the positions of the standing wave of each frequeny is different.
A.To prevent stains caused by standing waves.
B.It provides precise cleaning, and can also reduce damage to the cleaning tank.
3) The burst wave generated by high-speed switching method creates a number of high-order vibration
to the cleaning of the glass capillary tube and precision parts.
4) Ultrasound of 100Khz is a degassing effect, it is possible to prevent the attenuation of ultrasonic
cleaning power to keep up to near the top of the wash tank.
5) The pumping effect caused by high speed switching(mSec) is effecting washed complex fine holes.
6) The life time of Tank and Transducers increases.
超聲波發生器型號 | NXG-HSS |
超聲波發生器方法 | Oscillation Mode Choice F1-F2, F1-F3, F2-F3 2 frequency Switching / F1-F2-F3 3 frequency Switching |
切換周期 | 1~10ms Selectable |
超聲波頻率 | 28K/45K/100Khz |
超聲波輸出功率 | 600W / 600W / 300W |
超聲波換能器 | B.L.T Transducer for Multi Transducer |
輸入功率 | Single AC200V ~ AC220V / 60Hz, 4A Max |
顯示 | Character LCD(2 * 20) & LED |
輸出功率 | 50% ~ |
計時器 | 1sec ~ 99min 59sec |
環境 | Temperature:0~40℃, Humidity 0~80% |
尺寸(mm) | 310x440x130 |
重量 | 約12Kg |