德國奧萊斯OLES進口氨氣截止閥
【進口氨氣截止閥】工作原理：
氨氣閥門的高壓腔與鋼瓶連接，低壓腔為氣體出口，并通往使用系統。高壓表的示值為鋼瓶內貯存氣體的壓力。低壓表的出口壓力可由調節螺桿控制。使用時先打開鋼瓶總開關，然后順時針轉動低壓表壓力調節螺桿，使其壓縮主彈簧并傳動薄膜、彈簧墊塊和頂桿而將活門打開
德國奧萊斯OLES進口氨氣截止閥
【進口氨氣截止閥】工作原理：
氨氣閥門的高壓腔與鋼瓶連接，低壓腔為氣體出口，并通往使用系統。高壓表的示值為鋼瓶內貯存氣體的壓力。低壓表的出口壓力可由調節螺桿控制。使用時先打開鋼瓶總開關，然后順時針轉動低壓表壓力調節螺桿，使其壓縮主彈簧并傳動薄膜、彈簧墊塊和頂桿而將活門打開。這樣進口的高壓氣體由高壓室經節流減壓后進入低壓室，并經出口通往工作系統。轉動調節螺桿，改變活門開啟的高度，從而調節高壓氣體的通過量并達到所需的壓力值。氨用截止閥都裝有安全閥。它是保護氨氣減壓閥并使之安全使用的裝置，也是氨氣減壓閥出現故障的信號裝置。如果由于活門墊、活門損壞或由于其它原因，導致出口壓力自行上升并超過一定許可值時，安全閥會自動打開排氣。
The high pressure chamber of the ammonia valve is connected with the cylinder. The low pressure chamber is the gas outlet and leads to the service system. The pressure gauge indicates the pressure of the stored gas in the cylinder. The outlet pressure of low pressure meter can be controlled by adjusting screw. When in use, the cylinder main switch is opened first, and then the pressure regulating screw of the low pressure gauge is rotated clockwise to compress the main spring and drive the film, spring cushion block and ejector rod to open the valve. The imported high-pressure gas enters the low-pressure chamber through throttling and decompression, and passes through the outlet to the working system. Rotate the adjusting screw to change the opening height of the valve, so as to adjust the passing amount of high-pressure gas and achieve the required pressure value. Ammonia globe valves are equipped with safety valves. It is a device to protect the ammonia pressure reducing valve and make it safe to use. It is also a signal device for the failure of the ammonia pressure reducing valve. If the outlet pressure rises spontaneously and exceeds a certain allowable value due to valve mat, valve damage or other reasons, the relief valve will automatically open the exhaust.
【進口氨氣截止閥】產品優點：
①氨氣截止閥較普通截止閥為暗杠錐型設計，其密封面多位巴氏合金密封，在閥體材料上選用耐腐蝕鋼，可耐氨氣、液氨腐蝕，低溫可至-40℃,常規使用材質為WCB碳鋼，耐腐蝕性為CF8不銹鋼304，其材質大限度保證工況條件使用要求。
②氨氣截止閥密封副配對結構型式采用球、平面型，密封自動補償，達到雙重保險的效果，密封性能穩定，無粘著磨損，有效地解決了化工管道用普通閥門密封性能差、易泄露的難題。
③產品中法蘭采用榫槽密封結構，即使在管道壓力波動的情況下，保證中法蘭密封可靠。
④上密封裝置中采用多級聚四氟乙烯密封材料，形成組合密封，確保閥門在使用期限內填料函無介質泄露，消除了普通閥門填料函密封薄弱、介質易外漏，甚至造成事故的可能。
【進口氨氣截止閥】產品特點：
流線型，明桿帶支架
中法蘭螺栓連接
活套連接閥瓣
升降閥桿與手輪
支架與閥蓋一體式
傘齒輪操作選配
